TANK SIZE:
430 US bushels (15153 liters) 3 Plastic Tanks Tow-Between Front Tank - 186 US bu. (6554 liters) Middle Tank - 102 US bu. (3594 liters) Rear Tank - 142 US bu. (5004 liters) Tow-Behind Front Tank - 142 US bu. (5004 liters) Middle Tank - 102 US bu. (3594 liters) Rear Tank - 186 US bu. (6554 liters)
SEED DELIVERY:
Hydraulic driven dual fan
WHEELS AND TIRES:
Front Axle - dual caster, 22.5 x 16.1 (R3) STII wheel and tire (Tow-Behind Cart only) Rear Axle - 30.5L x 32 12PR AWT single tires @ 120 in. (3.05 m) tracking width
MANIFOLD:
Quick change double shoot valves Maximum of 8 primary 2.5 in. (6.4 cm) lines per meter roller
METER DRIVE:
Mechanical - ground driven mechanism with electric clutch control from cab. Includes 0.500 Sprocket Ratio in base
Optional:
Variable - hydraulically driven mechanism with control from cab
AUGER:
10 in. (25.4 cm) Steel flighting with cupped and double flighted intake.
MONITOR SYSTEM:
ISO 11783 Compliant Monitor/Electronics Cab Mounted IntelliView Monitor provides: Low-Level bin sensors Ultra sonic bin level sensors Velocity sensors Fan RPM Ground speed Individual meter roller speed Rate / acre (hectare) readout
TRANSPORT DIMENSIONS:
Ground Clearance: 25 in. (0.64 m) Height: 15 ft. 3 in. (4.65 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 29 ft. 3 in. (8.9 m) Weight Tow-Between (Empty): 11,090 lbs. (5030 kg) Weight Tow-Between (Loaded*): 36,780 lbs. (16680 kg) Length Tow-Behind (w/Auger): 28 ft. 3 in. (8.61 m) Weight Tow-Behind (Empty): 11,090 lbs. (5030 kg) Weight Tow-Behind (Loaded*): 36,780 lbs. (16680 kg) Weight Tow-Between Front Hitch (Loaded): 8,020 lbs. (3640 kg) * When loaded with 48 lb./ft.³ of product
AIR SYSTEM CAPACITIES:
Product Rate: Maximum rate per primary 2.5in. (6.4 cm) Line 40 lbs. / min @ 5000 fan RPM
Transport lighting meets ASAE 279.11
standard.
Requirements for Operation:
TRACTOR MONITOR INSTALLATION KIT IS REQUIRED FOR OPERATION (include brackets and harness). See Parts Division for ordering information.
Do not tow the implement at speeds
over 20 mph (32 kmph)
Do not tow a loaded air system while
transporting the implement between fields.
Do not tow more than two implements
behind the tractor while transporting between fields.
The total towed weight should be less
than 1.5 times the maximum operating weight provided by the tractor manufacturer.
The total towed weight should be
reduced based on tractor condition and road conditions.
Category IV tractor drawbar that can be
locked in a stationary position with an intermediate drawbar chain support.
Tractor equipped with 12-volt electrical
system with a 7 pin auxiliary electric outlet for warning lights
Closed center or load sensing
hydraulic system for tractor required
One hydraulic control valve for fan
and auger
Maximum Case Drain Pressure must
be less than 25 psi (172 kPa)
1 US gpm (3.8 lpm) Case Drain oil flow,
VR Cart - 4.8 US gpm (18.1 lpm)
Electrical system capable of 7 amp
nominal, 19 amp peak current draw (VR Cart - 4.0 amp nominal/peak)
20 US gpm (75.7 lpm) @ 5000 fan RPM
hydraulic oil flow
Additional 1.25 US gpm (4.7 lpm) per
meter required for variable rate meter drives
Typical hydraulic pressure requirement
is 2500 psi (17.2 MPa) but the requirement may increase to 3000 psi (20.7 MPa) with high product rates*
* Minimum requirements are a starting
point only and should be increased based on operating conditions and other implements that are used with the drill. Maximum allowable hydraulic pressure lower than either 3000 psi (20.7 MPa) or factory settings for individual tractors.
** Set up facilities are available for an
additional charge on the invoice. Pleasesee the Set up facilities chart for more information.
EX WORKS:
Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)