Build and Price your own Case Construction Equipment
  • Summary

Your Summary

Mid-mount Finish Mowers
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to manage your saved config group.
Select your region:  
Home > Seeding & Application > Mid-mount Finish Mowers

2. Select a model

  • 9CG Grass Catcher MOWER MODELS:
    54CMS, 60CMS, 230GMM
    TRACTOR APPLICATION:
    Boomer™ 1020 Boomer™ 1025 Boomer™ 1030 T1010, T1030, T1110 TZ18DA TZ22DA, TZ24DA TZ25DA
    SPECIFICATIONS:
    Number of Collection Bags - 3 Total Capacity - 12 bushels (423L) Collection Tube Diameter - 8 in. Blower Fan Drive - Rear PTO Blower Fan Size - 16 in. Blower Fan Speed - 2100 RPM Mounting Position - Tractor 3-point hitch
    *NOTE: 9CG Grass Catchers below
    SN 05CG1001 require new top link -AUB182297 and driveline kit part -AVB182291 if mounted on the following tractor: TZ18DA SN HB20439 and above, TZ22DA SN HE20719 or above, TZ25DA SN HC22266 and above
    WARRANTY
    New Holland Standard Warranty Applies
    SHIPPING POINT
    Dublin, GA
  • Model 914A Mid-Mount Rotary Mower WARRANTY:
    New Holland Standard Warranty Applies SHIPPING POINT: Auburn, GA Container Loader Pattern: 84 units
    NOTE: Mid-mount mower is NOT
    compatible with backhoe installed.
    SIDE-DISHACHARGE MOWERS:
    914MRM117 TRACTOR APPLICATION:
    TC18, TC21/21D/21DA, TC23DA, TC24D/24DA, TC26DA
    914MRM217 TRACTOR APPLICATION:
    TC18, TC21/21D/21DA, TC23DA, TC24D/24DA, TC26DA
    914MRM316 TRACTOR APPLICATION:
    Boomer 2030/2035, T2210, T2220, T1510, T1520, TC30, TC25, TC25D, TC29/29D/29DA/31DA, TC33/33D/33DA/34DA
    914MRM416 TRACTOR APPLICATION:
    Boomer 2030/2035, T2210, T2220, T1510, T1520, TC30, TC29DA/31DA, TC33/33D/33DA/34DA
    For TC18 above serial no. UD33666 and
    TC21/21D above serial no. UF33357.
    Important: When installing a 914A 60 in. -
    716418026 (below serial no. A04BC101) or 72 in. - 716419016 (below serial no. A04BD101) on a TC29DA/31DA, TC33DA/34DA in combination with a 14LA/15LA loader, kit number AUB182262 is required.
    Galaxy is a registered trademark of
    Galaxy Tire & Wheel Inc.
    REAR-DISCHARGE/MULCHING MOWER 914MRM617 TRACTOR APPLICATION:
    TC18, TC21/21D/21DA, TC23DA, TC24D/24DA, TC26DA
    914MRM706 TRACTOR APPLICATION:
    Boomer™ 2030/2035, T2210, T2220, T1510, T1520, TC30, TC29/29D/29DA/31DA, TC33/33D/33DA/34DA
    SPECIFICATIONS:
    Mulching Design - Yes Cutting Width (in.) - 72 Cutting Height (in.) - 1.5 to 4 Overall Width (in.) - 74.4 Number of Blades - 3 Blade Type - Standard Blade Length/Width (in.) - 24.5 x 3 Blade Tip Speed (in feet per minute) - 15,616 Drive - Mid-PTO Gauge Wheels (size in inches) - 6 x 2.5 Deck Spring Suspension - Standard Compatibility with Loader - Yes Tire Compatibility: -Agricultural (R1) - Yes -Industrial (R4) - Yes -Turf (R3) - Yes -Galaxy® Turf - Yes*
    *Must order AUB164147 caster wheel
    spring device (TCTC29D/29DA, TC31DA,TC33D/DA, TC34DA, T2210, T2220, Boomer 2030 & 2035).
    914MRM806 TRACTOR APPLICATION:
    Boomer™ 3040/3045, T2310, T2320, TC35D/DA, TC40D/DA
    TC45DA -Hydrostatic Models Only SPECIFICATIONS:
    Mulching Design - Yes Cutting Width (in.) - 84 Cutting Height (in.) - 2 to 4 Overall Width (in.) - 87.4 Number of Blades - 4 Blade Type - Gator Mulcher(r) blades Blade Length/Width (in.) - 22.81 x 3 Blade Tip Speed (in feet per minute) - 15,616 Drive - Mid-PTO Gauge Wheels (size in inches) - 6 x 2.5 Deck Spring Suspension - Standard Compatibility with Loader - Yes Tire Compatibility: -Agricultural (R1) - Yes -Industrial (R4) - Yes -Turf (R3) - Yes -Galaxy® Turf - Yes**
    **Must order AUB163560 Gauge Wheel
    Bar (Boomer 3040 & 3045, T2310,T2320, TC35D/35DA, TC40D/40DA and TC45DA).
    Gator is a registered trademark of
    Frederick Manufacturing of Kansas City,
  • 260GMS Side Discharge TRACTOR APPLICATION:
    Boomer 20 and Boomer 25
    266GMS Side Discharge TRACTOR APPLICATION:
    Boomer 30 and Boomer 35
    272GMS Side Discharge TRACTOR APPLICATION:
    Boomer 40 and Boomer 50
    SPECIFICATIONS:
    "Drive-over" design for installation Cutting Width (in.) - 72 Cutting Height (in.) - 1-4 Overall width (in.) - discharge chute down 85 Number of Blades - 3 Blade Type - Standard Blade Length/Width (in.) - 25 L x 2.5 W Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides and top, 1/4" spindle reinforcement pads Tire Compatibility: Agricultural (R1) - NO Large (24" Rear Rim) Industrial (R4) - NO Boomer 40 - 2103011884 and up Boomer 50 - 2105011659 and up Small (20" Rear Rim) Industrial (R4) - Yes, limited turn angle: Right Hand - 34 degrees Left Hand - 35 degrees Turf (R3) - Yes, limited turn angle: Right Hand - 34 degrees Left Hand - 35 degrees Galaxy Turf - NO
    NOTE: Steering Adjustments need to be
    made when using 272GMS with Industrial (R4) tires or Turf (R3) tires. Refer to ASIST.
    WARRANTY: 260/262/275GMS
    New Holland Standard Warranty Applies
    Serive Parts:
    260GMS - Mulch Kit - AMENHM639 262GMS - Mulch Kit - AMENHM628 275GMS - Mulch Kit - AMENHM728
  • 260GMS Side Discharge TRACTOR APPLICATION:
    Boomer 20 and Boomer 25
    266GMS Side Discharge TRACTOR APPLICATION:
    Boomer 30 and Boomer 35
    272GMS Side Discharge TRACTOR APPLICATION:
    Boomer 40 and Boomer 50
    SPECIFICATIONS:
    "Drive-over" design for installation Cutting Width (in.) - 72 Cutting Height (in.) - 1-4 Overall width (in.) - discharge chute down 85 Number of Blades - 3 Blade Type - Standard Blade Length/Width (in.) - 25 L x 2.5 W Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides and top, 1/4" spindle reinforcement pads Tire Compatibility: Agricultural (R1) - NO Large (24" Rear Rim) Industrial (R4) - NO Boomer 40 - 2103011884 and up Boomer 50 - 2105011659 and up Small (20" Rear Rim) Industrial (R4) - Yes, limited turn angle: Right Hand - 34 degrees Left Hand - 35 degrees Turf (R3) - Yes, limited turn angle: Right Hand - 34 degrees Left Hand - 35 degrees Galaxy Turf - NO
    NOTE: Steering Adjustments need to be
    made when using 272GMS with Industrial (R4) tires or Turf (R3) tires. Refer to ASIST.
    WARRANTY: 260/262/275GMS
    New Holland Standard Warranty Applies
    Serive Parts:
    260GMS - Mulch Kit - AMENHM639 262GMS - Mulch Kit - AMENHM628 275GMS - Mulch Kit - AMENHM728
  • 260GMS Side Discharge TRACTOR APPLICATION:
    Boomer 20 and Boomer 25
    266GMS Side Discharge TRACTOR APPLICATION:
    Boomer 30 and Boomer 35
    272GMS Side Discharge TRACTOR APPLICATION:
    Boomer 40 and Boomer 50
    SPECIFICATIONS:
    "Drive-over" design for installation Cutting Width (in.) - 72 Cutting Height (in.) - 1-4 Overall width (in.) - discharge chute down 85 Number of Blades - 3 Blade Type - Standard Blade Length/Width (in.) - 25 L x 2.5 W Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides and top, 1/4" spindle reinforcement pads Tire Compatibility: Agricultural (R1) - NO Large (24" Rear Rim) Industrial (R4) - NO Boomer 40 - 2103011884 and up Boomer 50 - 2105011659 and up Small (20" Rear Rim) Industrial (R4) - Yes, limited turn angle: Right Hand - 34 degrees Left Hand - 35 degrees Turf (R3) - Yes, limited turn angle: Right Hand - 34 degrees Left Hand - 35 degrees Galaxy Turf - NO
    NOTE: Steering Adjustments need to be
    made when using 272GMS with Industrial (R4) tires or Turf (R3) tires. Refer to ASIST.
    WARRANTY: 260/262/275GMS
    New Holland Standard Warranty Applies
    Serive Parts:
    260GMS - Mulch Kit - AMENHM639 262GMS - Mulch Kit - AMENHM628 275GMS - Mulch Kit - AMENHM728
  • 914MGC Grass Catcher
    Complete 3-Bag/10 Bushel GrassCatcher for Model 914A.
    NOTE: For 54 inch 914MRM (716416)
    and 60 inch MRM (716417) only.
    WARRANTY
    New Holland Standard Warranty Applies
IRONBuilder
Select your region:  
**Prices quoted are Manufacturer Suggested Retail Prices. Configurations and pricing must be reviewed by a New Holland dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.