Build and Price your own Case Construction Equipment
  • Summary

Your Summary

Pull-Type Sprayers
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to manage your saved config group.
Select your region:  
Home > Seeding & Application > Pull-Type Sprayers

2. Select a model

  • S1050-SUSPENDED BOOM Sprayer [ Versions ]
    • BOOMS:
      Boom widths: 80 ft. (24.4 m), 90 ft. (27.4 m), 100 ft. (30.5 m),
      2 gauge wheels per wing standard
      with windscreens 1 in. schedule 80 Polypropylene spray booms 15° upward boom lift and 5° downward
      BOOM SUSPENSION:
      Center pivot boom assembly Nitrogen accumulators on lift cylinders Parallel lift linked directly to sprayer cart frame Yaw suspension incorporated into boom assembly
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      480/80R38 (R1) 155PR
      TRACKING WIDTHS:
      72 in. to 120 in. (183 to 305 cm) standard wheel spacing 60 in. to 152 in. (152 to XXX cm) optional wheel spacing 24,000 lb. (10886 kg) axles standard 15,000 lb. (6804 kg) optional axles
      PLUMBING:
      Hydraulic dump valve allows continuous operation of the boom control hydraulic circuit without heat build up in the tractor hydraulic system. Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply 2 ball valves for boom section control. Up to 4 additional ball valves may be ordered for section and end nozzle control.
      ELECTRONICS:
      Joystick Control - 10 switch electric over hydraulic boom fold and foam marker control
      Optional (ISO 11783 Compliant)
      Intelliview III Display/Controller w/switchbox controller Intelliview II Plus Display/Controller w/switchbox controller Switchbox Controller
      TANKS - POLYETHYLENE:
      Product: 1000 U.S. gal. (3785 L) - 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Dry weight: 90 ft. - 7370 lbs. (3350 kg) empty
      Transport width:
      132 in. (335.3 cm) without windscreens 134 in. (340.4 cm) with windscreens Transport height: 150.9 in. (383.3 cm) without windscreens 148.9 in. (378.2 cm) with windscreens Transport length: 292 in. (741.7 cm) without windscreens 310.1 in. (787.7 cm) with windscreens 8 ft. impact release breakaway boom on outside boom
      Wheelbase:
      60 in. to 120 in. (152 to 305 cm) Boom to ground clearance 18 in. (45.7 cm) to 70 in. (177.8 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gage with U.S. & Imperial gallons
    • BOOMS:
      Boom widths: 80 ft. (24.4 m), 90 ft. (27.4 m), 100 ft. (30.5 m),
      2 gauge wheels per wing standard
      with windscreens 1 in. schedule 80 Polypropylene spray booms 15° upward boom lift and 5° downward
      BOOM SUSPENSION:
      Center pivot boom assembly Nitrogen accumulators on lift cylinders Parallel lift linked directly to sprayer cart frame Yaw suspension incorporated into boom assembly
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      480/80R38 (R1) 155PR
      TRACKING WIDTHS:
      72 in. to 120 in. (183 to 305 cm) standard wheel spacing 60 in. to 152 in. (152 to XXX cm) optional wheel spacing 24,000 lb. (10886 kg) axles standard 15,000 lb. (6804 kg) optional axles
      PLUMBING:
      Hydraulic dump valve allows continuous operation of the boom control hydraulic circuit without heat build up in the tractor hydraulic system. Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply 2 ball valves for boom section control. Up to 4 additional ball valves may be ordered for section and end nozzle control.
      ELECTRONICS:
      Joystick Control - 10 switch electric over hydraulic boom fold and foam marker control
      Optional (ISO 11783 Compliant)
      Intelliview III Display/Controller w/switchbox controller Intelliview II Plus Display/Controller w/switchbox controller Switchbox Controller
      TANKS - POLYETHYLENE:
      Product: 1000 U.S. gal. (3785 L) - 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Dry weight: 90 ft. - 7370 lbs. (3350 kg) empty
      Transport width:
      132 in. (335.3 cm) without windscreens 134 in. (340.4 cm) with windscreens Transport height: 150.9 in. (383.3 cm) without windscreens 148.9 in. (378.2 cm) with windscreens Transport length: 292 in. (741.7 cm) without windscreens 310.1 in. (787.7 cm) with windscreens 8 ft. impact release breakaway boom on outside boom
      Wheelbase:
      60 in. to 120 in. (152 to 305 cm) Boom to ground clearance 18 in. (45.7 cm) to 70 in. (177.8 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gage with U.S. & Imperial gallons
    • BOOMS:
      Boom widths: 80 ft. (24.4 m), 90 ft. (27.4 m), 100 ft. (30.5 m),
      2 gauge wheels per wing standard
      with windscreens 1 in. schedule 80 Polypropylene spray booms 15° upward boom lift and 5° downward
      BOOM SUSPENSION:
      Center pivot boom assembly Nitrogen accumulators on lift cylinders Parallel lift linked directly to sprayer cart frame Yaw suspension incorporated into boom assembly
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      480/80R38 (R1) 155PR
      TRACKING WIDTHS:
      72 in. to 120 in. (183 to 305 cm) standard wheel spacing 60 in. to 152 in. (152 to XXX cm) optional wheel spacing 24,000 lb. (10886 kg) axles standard 15,000 lb. (6804 kg) optional axles
      PLUMBING:
      Hydraulic dump valve allows continuous operation of the boom control hydraulic circuit without heat build up in the tractor hydraulic system. Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply 2 ball valves for boom section control. Up to 4 additional ball valves may be ordered for section and end nozzle control.
      ELECTRONICS:
      Joystick Control - 10 switch electric over hydraulic boom fold and foam marker control
      Optional (ISO 11783 Compliant)
      Intelliview III Display/Controller w/switchbox controller Intelliview II Plus Display/Controller w/switchbox controller Switchbox Controller
      TANKS - POLYETHYLENE:
      Product: 1000 U.S. gal. (3785 L) - 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Dry weight: 90 ft. - 7370 lbs. (3350 kg) empty
      Transport width:
      132 in. (335.3 cm) without windscreens 134 in. (340.4 cm) with windscreens Transport height: 150.9 in. (383.3 cm) without windscreens 148.9 in. (378.2 cm) with windscreens Transport length: 292 in. (741.7 cm) without windscreens 310.1 in. (787.7 cm) with windscreens 8 ft. impact release breakaway boom on outside boom
      Wheelbase:
      60 in. to 120 in. (152 to 305 cm) Boom to ground clearance 18 in. (45.7 cm) to 70 in. (177.8 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gage with U.S. & Imperial gallons
  • S1070-SUSPENDED BOOM Sprayer [ Versions ]
    • BOOMS:
      Boom widths: 80 ft. (24.4 m), 90 ft. (27.4 m), 100 ft. (30.5 m), 120 ft. (36.6 m), 126 ft (38.4m), 134 ft. (40.8 m) 2 gauge wheels per wing standard with windscreens 1 in. schedule 80 Polypropylene spray booms 15° upward boom lift and 5° downward
      BOOM SUSPENSION:
      Center pivot boom assembly Nitrogen accumulators on lift cylinders Parallel lift linked directly to sprayer cart frame Yaw suspension incorporated into boom assembly
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      480/80R38 (R1) 155PR
      TRACKING WIDTHS:
      72 in. to 120 in. (183 to 305 cm) standard wheel spacing 88 in to 152 in optional wheel spacing for 24,000 lb. (10886 kg) axles standard 15,000 lb. (6804 kg) optional axles
      PLUMBING:
      Hydraulic dump valve allows continuous operation of the boom control hydraulic circuit without heat build up in the tractor hydraulic system. Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply 2 ball valves for boom section control. Up to 4 additional ball valves may be ordered for section and end nozzle control.
      ELECTRONICS:
      Joystick Control - 10 switch electric over hydraulic boom fold and foam marker control
      Optional (ISO 11783 Compliant)
      Intelliview III Display/Controller w/switchbox controller Intelliview II Plus Display/Controller w/switchbox controller Switchbox Controller
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) - S1070 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Dry weight: 90 ft. - 7950 lbs. (3614 kg) empty 120 ft. - 8500 lbs. (3864 kg) empty Transport width: 132 in. (335.3 cm) without windscreens 134 in. (340.4 cm) with windscreens Transport height: 150.9 in. (383.3 cm) without windscreens 148.9 in. (378.2 cm) with windscreens Transport length: 292 in. (741.7 cm) without windscreens 310.1 in. (787.7 cm) with windscreens 8 ft. impact release breakaway boom on outside boom
      Wheelbase:
      72 in. to 120 in. (183 to 305 cm) Boom to ground clearance 18 in. (45.7 cm) to 70 in. (177.8 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gage with U.S. & Imperial gallons
    • BOOMS:
      Boom widths: 80 ft. (24.4 m), 90 ft. (27.4 m), 100 ft. (30.5 m), 120 ft. (36.6 m), 126 ft (38.4m), 134 ft. (40.8 m) 2 gauge wheels per wing standard with windscreens 1 in. schedule 80 Polypropylene spray booms 15° upward boom lift and 5° downward
      BOOM SUSPENSION:
      Center pivot boom assembly Nitrogen accumulators on lift cylinders Parallel lift linked directly to sprayer cart frame Yaw suspension incorporated into boom assembly
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      480/80R38 (R1) 155PR
      TRACKING WIDTHS:
      72 in. to 120 in. (183 to 305 cm) standard wheel spacing 88 in to 152 in optional wheel spacing for 24,000 lb. (10886 kg) axles standard 15,000 lb. (6804 kg) optional axles
      PLUMBING:
      Hydraulic dump valve allows continuous operation of the boom control hydraulic circuit without heat build up in the tractor hydraulic system. Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply 2 ball valves for boom section control. Up to 4 additional ball valves may be ordered for section and end nozzle control.
      ELECTRONICS:
      Joystick Control - 10 switch electric over hydraulic boom fold and foam marker control
      Optional (ISO 11783 Compliant)
      Intelliview III Display/Controller w/switchbox controller Intelliview II Plus Display/Controller w/switchbox controller Switchbox Controller
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) - S1070 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Dry weight: 90 ft. - 7950 lbs. (3614 kg) empty 120 ft. - 8500 lbs. (3864 kg) empty Transport width: 132 in. (335.3 cm) without windscreens 134 in. (340.4 cm) with windscreens Transport height: 150.9 in. (383.3 cm) without windscreens 148.9 in. (378.2 cm) with windscreens Transport length: 292 in. (741.7 cm) without windscreens 310.1 in. (787.7 cm) with windscreens 8 ft. impact release breakaway boom on outside boom
      Wheelbase:
      72 in. to 120 in. (183 to 305 cm) Boom to ground clearance 18 in. (45.7 cm) to 70 in. (177.8 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gage with U.S. & Imperial gallons
    • BOOMS:
      Boom widths: 80 ft. (24.4 m), 90 ft. (27.4 m), 100 ft. (30.5 m), 120 ft. (36.6 m), 126 ft (38.4m), 134 ft. (40.8 m) 2 gauge wheels per wing standard with windscreens 1 in. schedule 80 Polypropylene spray booms 15° upward boom lift and 5° downward
      BOOM SUSPENSION:
      Center pivot boom assembly Nitrogen accumulators on lift cylinders Parallel lift linked directly to sprayer cart frame Yaw suspension incorporated into boom assembly
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      480/80R38 (R1) 155PR
      TRACKING WIDTHS:
      72 in. to 120 in. (183 to 305 cm) standard wheel spacing 88 in to 152 in optional wheel spacing for 24,000 lb. (10886 kg) axles standard 15,000 lb. (6804 kg) optional axles
      PLUMBING:
      Hydraulic dump valve allows continuous operation of the boom control hydraulic circuit without heat build up in the tractor hydraulic system. Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply 2 ball valves for boom section control. Up to 4 additional ball valves may be ordered for section and end nozzle control.
      ELECTRONICS:
      Joystick Control - 10 switch electric over hydraulic boom fold and foam marker control
      Optional (ISO 11783 Compliant)
      Intelliview III Display/Controller w/switchbox controller Intelliview II Plus Display/Controller w/switchbox controller Switchbox Controller
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) - S1070 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Dry weight: 90 ft. - 7950 lbs. (3614 kg) empty 120 ft. - 8500 lbs. (3864 kg) empty Transport width: 132 in. (335.3 cm) without windscreens 134 in. (340.4 cm) with windscreens Transport height: 150.9 in. (383.3 cm) without windscreens 148.9 in. (378.2 cm) with windscreens Transport length: 292 in. (741.7 cm) without windscreens 310.1 in. (787.7 cm) with windscreens 8 ft. impact release breakaway boom on outside boom
      Wheelbase:
      72 in. to 120 in. (183 to 305 cm) Boom to ground clearance 18 in. (45.7 cm) to 70 in. (177.8 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gage with U.S. & Imperial gallons
    • BOOMS:
      Boom widths: 80 ft. (24.4 m), 90 ft. (27.4 m), 100 ft. (30.5 m), 120 ft. (36.6 m), 126 ft (38.4m), 134 ft. (40.8 m) 2 gauge wheels per wing standard with windscreens 1 in. schedule 80 Polypropylene spray booms 15° upward boom lift and 5° downward
      BOOM SUSPENSION:
      Center pivot boom assembly Nitrogen accumulators on lift cylinders Parallel lift linked directly to sprayer cart frame Yaw suspension incorporated into boom assembly
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      480/80R38 (R1) 155PR
      TRACKING WIDTHS:
      72 in. to 120 in. (183 to 305 cm) standard wheel spacing 88 in to 152 in optional wheel spacing for 24,000 lb. (10886 kg) axles standard 15,000 lb. (6804 kg) optional axles
      PLUMBING:
      Hydraulic dump valve allows continuous operation of the boom control hydraulic circuit without heat build up in the tractor hydraulic system. Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply 2 ball valves for boom section control. Up to 4 additional ball valves may be ordered for section and end nozzle control.
      ELECTRONICS:
      Joystick Control - 10 switch electric over hydraulic boom fold and foam marker control
      Optional (ISO 11783 Compliant)
      Intelliview III Display/Controller w/switchbox controller Intelliview II Plus Display/Controller w/switchbox controller Switchbox Controller
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) - S1070 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Dry weight: 90 ft. - 7950 lbs. (3614 kg) empty 120 ft. - 8500 lbs. (3864 kg) empty Transport width: 132 in. (335.3 cm) without windscreens 134 in. (340.4 cm) with windscreens Transport height: 150.9 in. (383.3 cm) without windscreens 148.9 in. (378.2 cm) with windscreens Transport length: 292 in. (741.7 cm) without windscreens 310.1 in. (787.7 cm) with windscreens 8 ft. impact release breakaway boom on outside boom
      Wheelbase:
      72 in. to 120 in. (183 to 305 cm) Boom to ground clearance 18 in. (45.7 cm) to 70 in. (177.8 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gage with U.S. & Imperial gallons
    • BOOMS:
      Boom widths: 80 ft. (24.4 m), 90 ft. (27.4 m), 100 ft. (30.5 m), 120 ft. (36.6 m), 126 ft (38.4m), 134 ft. (40.8 m) 2 gauge wheels per wing standard with windscreens 1 in. schedule 80 Polypropylene spray booms 15° upward boom lift and 5° downward
      BOOM SUSPENSION:
      Center pivot boom assembly Nitrogen accumulators on lift cylinders Parallel lift linked directly to sprayer cart frame Yaw suspension incorporated into boom assembly
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      480/80R38 (R1) 155PR
      TRACKING WIDTHS:
      72 in. to 120 in. (183 to 305 cm) standard wheel spacing 88 in to 152 in optional wheel spacing for 24,000 lb. (10886 kg) axles standard 15,000 lb. (6804 kg) optional axles
      PLUMBING:
      Hydraulic dump valve allows continuous operation of the boom control hydraulic circuit without heat build up in the tractor hydraulic system. Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply 2 ball valves for boom section control. Up to 4 additional ball valves may be ordered for section and end nozzle control.
      ELECTRONICS:
      Joystick Control - 10 switch electric over hydraulic boom fold and foam marker control
      Optional (ISO 11783 Compliant)
      Intelliview III Display/Controller w/switchbox controller Intelliview II Plus Display/Controller w/switchbox controller Switchbox Controller
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) - S1070 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Dry weight: 90 ft. - 7950 lbs. (3614 kg) empty 120 ft. - 8500 lbs. (3864 kg) empty Transport width: 132 in. (335.3 cm) without windscreens 134 in. (340.4 cm) with windscreens Transport height: 150.9 in. (383.3 cm) without windscreens 148.9 in. (378.2 cm) with windscreens Transport length: 292 in. (741.7 cm) without windscreens 310.1 in. (787.7 cm) with windscreens 8 ft. impact release breakaway boom on outside boom
      Wheelbase:
      72 in. to 120 in. (183 to 305 cm) Boom to ground clearance 18 in. (45.7 cm) to 70 in. (177.8 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gage with U.S. & Imperial gallons
    • BOOMS:
      Boom widths: 80 ft. (24.4 m), 90 ft. (27.4 m), 100 ft. (30.5 m), 120 ft. (36.6 m), 126 ft (38.4m), 134 ft. (40.8 m) 2 gauge wheels per wing standard with windscreens 1 in. schedule 80 Polypropylene spray booms 15° upward boom lift and 5° downward
      BOOM SUSPENSION:
      Center pivot boom assembly Nitrogen accumulators on lift cylinders Parallel lift linked directly to sprayer cart frame Yaw suspension incorporated into boom assembly
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      480/80R38 (R1) 155PR
      TRACKING WIDTHS:
      72 in. to 120 in. (183 to 305 cm) standard wheel spacing 88 in to 152 in optional wheel spacing for 24,000 lb. (10886 kg) axles standard 15,000 lb. (6804 kg) optional axles
      PLUMBING:
      Hydraulic dump valve allows continuous operation of the boom control hydraulic circuit without heat build up in the tractor hydraulic system. Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply 2 ball valves for boom section control. Up to 4 additional ball valves may be ordered for section and end nozzle control.
      ELECTRONICS:
      Joystick Control - 10 switch electric over hydraulic boom fold and foam marker control
      Optional (ISO 11783 Compliant)
      Intelliview III Display/Controller w/switchbox controller Intelliview II Plus Display/Controller w/switchbox controller Switchbox Controller
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) - S1070 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Dry weight: 90 ft. - 7950 lbs. (3614 kg) empty 120 ft. - 8500 lbs. (3864 kg) empty Transport width: 132 in. (335.3 cm) without windscreens 134 in. (340.4 cm) with windscreens Transport height: 150.9 in. (383.3 cm) without windscreens 148.9 in. (378.2 cm) with windscreens Transport length: 292 in. (741.7 cm) without windscreens 310.1 in. (787.7 cm) with windscreens 8 ft. impact release breakaway boom on outside boom
      Wheelbase:
      72 in. to 120 in. (183 to 305 cm) Boom to ground clearance 18 in. (45.7 cm) to 70 in. (177.8 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gage with U.S. & Imperial gallons
  • S1070-WHEELED BOOM Sprayer [ Versions ]
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
    • Boom widths:
      80 ft. (24.4 m), 84 ft. (25.6 m), 90 ft (27.4 m), 94 ft. (28.6 m), 100 ft. (30.5 m), 104 ft. (31.7 m), 110 ft. (33.5 m), 114 ft. (34.7 m), 120 ft. (36.6 m), 124 ft. (37.8 m), 130 ft. (39.6 m), 134 ft. (40.8 m) 5 in. x 5 in. (12.7 cm) boom construction 4 castor wheels (80 ft. to 104 ft) 6 castor wheels (110 ft. to 134 ft.) 1 in. schedule 80 PVC spray booms
      BOOM SUSPENSION:
      Castor features trailing link design with coil over shock suspension
      FRAME:
      4 in. (10.16 cm) x 10 in. (25.4 cm) frame construction Narrow A-Frame for cart and wheel spacing Powder coating paint 6° slope from back to front for drainage Pivoting ladder for tank access
      HITCH:
      Perfect™ cast clevis type
      TIRES:
      18.4 x 26 AWT R3 12PR 80 in - 120 in. axle
      TRACKING WIDTHS:
      Optional 72 in. to 120 in. (183 to 305 cm) wheel spacing 24,000 lb. (10886 kg) axles
      PUMPS:
      Hypro™ HM1C hydraulic driven for 8 to 15 gpm (30-57 L) oil flow Hypro™ HM3C hydraulic driven for 15 to 23 gpm oil flow (57-87 L) oil flow Ace™ FMC 206 hydraulic driven for 8 to 15 gpm oil flow (23-34 L) oil flow
      NOZZLES:
      TeeJet™ single or triple-head nozzle bodies Swivel-Jet double-head nozzle bodies Combo-Jet™ single, double, or triple-head nozzle bodies
      TeeJet™ Visaflo extended range flat
      fan or air induction tips Combo-Jet™ extended range, mid-range, and drift control tips
      PLUMBING:
      Polypropylene plumbing used throughout sprayer 6° sloped plumbing manifold Flange coupler fittings Strainer located on pressure side of Pump Standard valves include agitation, tank return, and tank rinse Optional valves include rinse wand, container rinse, induction supply, venturi supply
      TANKS - POLYETHYLENE:
      Product: 1600 U.S. gal. (6,057 L) 120 U.S. gal clean water rinse tank 3.2 U.S. gal emergency hand/eye wash rinse tank 12 U.S. gal chemical Induction tank (optional) with c-seal lid
      DIMENSIONS:
      Transport width (fold arms): 134 in (340.4 cm) Transport height: 119.5 in. (303.7 cm) Wheelbase: 72 in. to 120 in. (183 to 305 cm) Spray height range: 15 to 47 in. (38.1 to 119.4 cm) Axles to ground clearance 33 in. (83.8 cm) to 36 in. (91.4 cm) Travel Speed - Up to 20 mph max (32 KM/Hr) (Depending on tire selection)
      MISCELLANEOUS:
      Rotating rinse nozzle located on main tank 4 Agitation nozzles located in main tank Sight gauge with U.S. & Imperial gallons
IRONBuilder
Select your region:  
**Prices quoted are Manufacturer Suggested Retail Prices. Configurations and pricing must be reviewed by a New Holland dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.