Build and Price your own Case Construction Equipment
  • Summary

Your Summary

Self-Propelled Sprayers
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to manage your saved config group.
Select your region:  
Home > Seeding & Application > Self-Propelled Sprayers

2. Select a model

  • SP.240F [ Versions ]
    • Engine: QSB 6.7 liter Cummins. Choice
      of 240 HP (Power bulge 250 HP) or 275 HP electronically controlled Tier III Engine, waste gate turbo charger with air to air after cooling, engine muffler, 160 amp alternator, two Heavy Duty batteries and 150 gallon (568 L) fuel tank
      Transmission: Hydrostatic
      drive system with twin Sundstrand heavy duty pumps.
      Final Drives: 4-wheel drive, Poclain®
      wheel drive motors - MW14 front and your choice of MS18 Dyna Plus with 00 or 02 cams in rear with 5-speed power shift.
      Travel Speeds - MPH: With 00 cams in
      rear - Range 1: 0-13.1 mph; Range 2: 0- 15.4 mph; Range 3: 0-18 mph; Range 4: 0-22.5 mph; Range 5: 0-29.2 mph. With 02 cams (13% more torque) in rear - Range 1: 0-11.3 mph; Range 2: 0-13 mph; Range 3: 0-16.1 mph; Range 4: 0- 19.9 mph; Range 5: 0-26.1 mph. Note: Speeds will vary depending on tire size.
      Travel Speeds - kph: With 00 cams in
      rear - Range 1: 0-21 kph; Range 2: 0- 24.8 kph; Range 3: 0-29 km; Range 4: 0-36.2; Range 5: 0-47 kph. With 02 cams (13% more torque) in rear - Range 1: 0-18.2 kph; Range 2: 0-21 kph; Range 3: 0-26 kph; Range 4: 0-32 kph; Range 5: 0-42 kph. Note: Speeds will vary depending on tire size.
      Brakes: Parking: 4-wheel, spring
      applied. Service: 4-wheel dynamic internal wet disc and oil cooled.
      Engine Related Accessories: Remote
      engine control, remote battery terminals for chemical transfer pumps and remote product pump switch.
      Chassis: 72" (183 cm) under body
      clearance, front mount boom and cab, wheel legs widen equally on left and right side, mid-mount product tank, rear- mount engine and folding rear approach ladder with cat walk on left side.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust with steering cylinders mounted on top of frame. 15' (4.57 m) turning radius with standard 2-wheel steer.
      Suspension: 4-wheel independent
      suspension with integrated Hydraulic Leveling/Shock Absorber ride, auto leveling for each wheel leg, with a suspension travel of 20" (50.8 cm).
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank.
      Auxiliary Hydraulic Circuit: Closed center
      pressure compensated, hydraulic pump with 2500 psi (172.37 bar) operating pressure.
      Dimensions: Width: 12.8' (3.90 m)
      narrow, Width: 15.1' (4.6 m) wide, Crop Clearance: 72" (183 cm) Height: 13.2' (4.02 m), Length: 28.2' (8.60 m) boom unfolded.
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Deluxe "Ultra Quiet" Cab.
      Includes: Air Ride cab suspension with leveling valve, pressurization, heat and air conditioning, charcoal cab filter, AM/FM/WX radio w/CD player, tilt/telescopic steering wheel, long windshield wiper with washer, instructors seat along with a deluxe Air Ride, centerline mounted operators seat. Engine Monitoring system.
      Product Tank Options:SP.240F - 1000
      gallon (3785 L) poly, 1000 gallon (3785 L) stainless steel, 1200 gallon(4542 L) poly, or 1200 gallon (4542 L)stainless steel. Poly tanks feature a deep sump and stainless steel tanks feature a full length sump. All tanks have adjustable agitation. Tanks are mounted crossways behind cab for superior weight distribution. 3 Gallon (11.35 L) hand wash tank.
      Rinse System: 150 Gallon (567.8 L)
      flush and rinse kit- mounts directly behind product tank. Includes separate 2” (5.8 cm) fast fill connection.
      Product Circuit: 9306C HM5C Hypro
      hydraulic drive pump with silicon seal, mounted horizontally below the product tank to aid in priming. 210 GPM @ 80 PSI (795 L @ 5.5 bar) pump capacity only, 3” (7.62 cm) suction/fill line and 2” (5.08 cm) fast fill kit. Hydraulic flow control valve, RFM 60 flow meter . 2" (5.08 cm) Product tank drain kit. NOTE: Rate Controllers & Speed Sensors are NOT INCLUDED.
      Bypass Line/Fill Circuit: 2" (5.08 cm)
      product tank bypass/fill line between Y- strainer and product tank, includes one- way check valve. Useful for faster agitation while filling and you have the ability to fill product tank with the sprayer pump.
      Hardware: Stainless steel on boom and
      most frame parts.
      Boom: 1” (2.5 cm) Stainless steel lines.
      Front mount with nitrogen accumulator suspension. U.S. sizes - 90/60’ and 100/60’ (27.4/18.3 and 30.48/18.3 m). 3 way nozzle bodies.
      Wheel Tread: Hydraulically adjustable
      tread width from 120" (304.8 cm) narrow to 160" (406.4 cm) wide. 18" (45.7 cm) leg profile at wheel drive hub. Includes tread width locking valve. Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting -2 high/low beam headlights, 4 working lights, 6 stadium working lights & 4 amber warning/signals. Rear Lighting -2 working/backup, 2 red tail/brake, 2 tail/signal & 2 amber warning/signal. Backup alarm. SMV sign and reflective tape.
    • Engine: QSB 6.7 liter Cummins. Choice
      of 240 HP (Power bulge 250 HP) or 275 HP electronically controlled Tier III Engine, waste gate turbo charger with air to air after cooling, engine muffler, 160 amp alternator, two Heavy Duty batteries and 150 gallon (568 L) fuel tank
      Transmission: Hydrostatic
      drive system with twin Sundstrand heavy duty pumps.
      Final Drives: 4-wheel drive, Poclain®
      wheel drive motors - MW14 front and your choice of MS18 Dyna Plus with 00 or 02 cams in rear with 5-speed power shift.
      Travel Speeds - MPH: With 00 cams in
      rear - Range 1: 0-13.1 mph; Range 2: 0- 15.4 mph; Range 3: 0-18 mph; Range 4: 0-22.5 mph; Range 5: 0-29.2 mph. With 02 cams (13% more torque) in rear - Range 1: 0-11.3 mph; Range 2: 0-13 mph; Range 3: 0-16.1 mph; Range 4: 0- 19.9 mph; Range 5: 0-26.1 mph. Note: Speeds will vary depending on tire size.
      Travel Speeds - kph: With 00 cams in
      rear - Range 1: 0-21 kph; Range 2: 0- 24.8 kph; Range 3: 0-29 km; Range 4: 0-36.2; Range 5: 0-47 kph. With 02 cams (13% more torque) in rear - Range 1: 0-18.2 kph; Range 2: 0-21 kph; Range 3: 0-26 kph; Range 4: 0-32 kph; Range 5: 0-42 kph. Note: Speeds will vary depending on tire size.
      Brakes: Parking: 4-wheel, spring
      applied. Service: 4-wheel dynamic internal wet disc and oil cooled.
      Engine Related Accessories: Remote
      engine control, remote battery terminals for chemical transfer pumps and remote product pump switch.
      Chassis: 72" (183 cm) under body
      clearance, front mount boom and cab, wheel legs widen equally on left and right side, mid-mount product tank, rear- mount engine and folding rear approach ladder with cat walk on left side.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust with steering cylinders mounted on top of frame. 15' (4.57 m) turning radius with standard 2-wheel steer.
      Suspension: 4-wheel independent
      suspension with integrated Hydraulic Leveling/Shock Absorber ride, auto leveling for each wheel leg, with a suspension travel of 20" (50.8 cm).
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank.
      Auxiliary Hydraulic Circuit: Closed center
      pressure compensated, hydraulic pump with 2500 psi (172.37 bar) operating pressure.
      Dimensions: Width: 12.8' (3.90 m)
      narrow, Width: 15.1' (4.6 m) wide, Crop Clearance: 72" (183 cm) Height: 13.2' (4.02 m), Length: 28.2' (8.60 m) boom unfolded.
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Deluxe "Ultra Quiet" Cab.
      Includes: Air Ride cab suspension with leveling valve, pressurization, heat and air conditioning, charcoal cab filter, AM/FM/WX radio w/CD player, tilt/telescopic steering wheel, long windshield wiper with washer, instructors seat along with a deluxe Air Ride, centerline mounted operators seat. Engine Monitoring system.
      Product Tank Options:SP.240F - 1000
      gallon (3785 L) poly, 1000 gallon (3785 L) stainless steel, 1200 gallon(4542 L) poly, or 1200 gallon (4542 L)stainless steel. Poly tanks feature a deep sump and stainless steel tanks feature a full length sump. All tanks have adjustable agitation. Tanks are mounted crossways behind cab for superior weight distribution. 3 Gallon (11.35 L) hand wash tank.
      Rinse System: 150 Gallon (567.8 L)
      flush and rinse kit- mounts directly behind product tank. Includes separate 2” (5.8 cm) fast fill connection.
      Product Circuit: 9306C HM5C Hypro
      hydraulic drive pump with silicon seal, mounted horizontally below the product tank to aid in priming. 210 GPM @ 80 PSI (795 L @ 5.5 bar) pump capacity only, 3” (7.62 cm) suction/fill line and 2” (5.08 cm) fast fill kit. Hydraulic flow control valve, RFM 60 flow meter . 2" (5.08 cm) Product tank drain kit. NOTE: Rate Controllers & Speed Sensors are NOT INCLUDED.
      Bypass Line/Fill Circuit: 2" (5.08 cm)
      product tank bypass/fill line between Y- strainer and product tank, includes one- way check valve. Useful for faster agitation while filling and you have the ability to fill product tank with the sprayer pump.
      Hardware: Stainless steel on boom and
      most frame parts.
      Boom: 1” (2.5 cm) Stainless steel lines.
      Front mount with nitrogen accumulator suspension. U.S. sizes - 90/60’ and 100/60’ (27.4/18.3 and 30.48/18.3 m). 3 way nozzle bodies.
      Wheel Tread: Hydraulically adjustable
      tread width from 120" (304.8 cm) narrow to 160" (406.4 cm) wide. 18" (45.7 cm) leg profile at wheel drive hub. Includes tread width locking valve. Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting -2 high/low beam headlights, 4 working lights, 6 stadium working lights & 4 amber warning/signals. Rear Lighting -2 working/backup, 2 red tail/brake, 2 tail/signal & 2 amber warning/signal. Backup alarm. SMV sign and reflective tape.
  • SP.240R [ Versions ]
    • Chassis: 42” or 48” (106.7 or 122 cm)
      Underbody clearance, C-channel frame, front mount engine with tip up hood, wheel legs widen individually, rear mount boom and fold up ladder located on left side.
      Engine: QSB 6.7 liter Cummins 240 HP
      (Power Bulge 250 HP) electronically controlled Tier III Engine, turbo charged with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 120 gallon (454 L) fuel tank.
      Engine Related Accessories: Electronic
      cruise control. Remote battery terminals. Transmission: Allison RDS 2500 Heavy duty 5-speed automatic transmission with locking torque converter.
      Differential: JCB rear differential with “On
      the Go” hydraulic differential lock. Final Drives: Angled drive shafts with planetary final drives or gear style drop boxes.
      Travel Speeds w/angle drive - MPH: (At
      2550 engine rpm) 1st gear: 8.7 mph; 2nd gear: 16.1 mph; 3rd gear: 21.2 mph; 4th gear: 30.6 mph; 5th gear 41.3 mph. Note: Speeds will vary depending on tire size.
      Travel Speeds w/drop box drive - MPH:
      (At 2550 engine rpm) 1st gear: 8.2 mph; 2nd gear: 15.1 mph; 3rd gear: 19.9 mph; 4th gear: 28.7; 5th gear 38.8 mph. Note: Speeds will vary depending on tire size. Travel Speeds w/angle drive - kph (At 2550 engine rpm) 1st gear: 14 kph 2nd gear: 25.9 kph 3rd gear: 34.1 kph 4th gear: 49.2 kph 5th gear 66.4 kph Note: Speeds will vary depending on tire size. Travel Speeds w/drop box drive - kph (At 2550 engine rpm) 1st gear: 13.2 kph 2nd gear: 24.3 kph 3rd gear: 32 kph 4th gear: 46.2 kph 5th gear 62.4 kph Note: Speeds will vary depending on tire size.
      Brakes: Parking: Spring applied -
      hydraulic release. Service: Two (2) Wheel heavy duty power discs on rear axle.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust and a 15' (4.6 m) turning radius. Suspension: Parallel drag link front and rear suspension, automatically adjusted integrated air ride system with sway control.
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank. Operates air ride suspension, optional boom blow out kit and foam marker.
      Auxiliary Hydraulic Circuit: 30 gpm
      (113.6 L) closed center pressure compensated, hydraulic pump with 2500 psi (172.4 bar) operating pressure.
      Dimensions: Width: 14' 3" (4.4m),
      Height 12' 11” (3.7 m), Length: 27’ 2” (8.3 m) (boom unfolded), crop clearance with angled drive shafts - 42" (106.7 cm), with drop boxes 48” (122 cm).
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Enhanced Rear View deluxe cab.
      Includes: Heat & air conditioning, pressurization, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, windshield wiper with washer, instructional seat along with a deluxe Air Ride operator's seat and 2 large outside mirrors. Hydraulic lift ladder and engine monitor system.
      Product Tank Options: 1000 or 1200
      gallon (3785 or 4542 L) poly or 1000 gallon (3785 L) stainless steel tank with baffles, deep sump, cradle, and 3 gallon (11.35 L) clean water hand wash tank.
      Product Circuit: ACE FMC-150F-206
      hydraulic drive pump with silicon carbide seal, mounted below the product tank to aid in priming. 100 GPM @ 88 PSI (378 L @ 6.07 bar) (pump capacity only). 2” (5.08 cm) hose between Y-Strainer and boom control valves. 2” (5.08 cm) hose between tank and pump. 1 1/2" (3.8 cm) poly regulating valve, TeeJet electric on/off boom ball valves, RFM60 flow meter and 2" (5.08 cm) fast fill kit. NOTE: Rate Controllers and Speed Sensors are NOT INCLUDED.
      Boom: Rear mount with nitrogen
      accumulator suspension. Truss Style booms feature tubular truss const. and 1" (2.5 cm) stainless steel boom lines. U.S. sizes - 90/60 or 100/60 ft. (27.3/18.3 or 30.5/18.3 m). 3 Way Nozzle bodies.
      Front & Rear Axle: Manually adjustable
      axles with wheel track adjustment between 120” to 150” (304.8 to 381 cm). Note: Tread width is based on 380/90R46 tires."
      Lighting & Markings:
      Forward Lighting: 4-highway headlights in front grill, 10-forward field working lights (4 in grill & 6 stadium) & 2 - amber warning/signals. Rear Lighting: 4 - working, 2 - backup, 2 - red tail/brake, 2 - red tail/single & 2 - amber warning/signal. Backup alarm,
    • Chassis: 42” or 48” (106.7 or 122 cm)
      Underbody clearance, C-channel frame, front mount engine with tip up hood, wheel legs widen individually, rear mount boom and fold up ladder located on left side.
      Engine: QSB 6.7 liter Cummins 240 HP
      (Power Bulge 250 HP) electronically controlled Tier III Engine, turbo charged with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 120 gallon (454 L) fuel tank.
      Engine Related Accessories: Electronic
      cruise control. Remote battery terminals. Transmission: Allison RDS 2500 Heavy duty 5-speed automatic transmission with locking torque converter.
      Differential: JCB rear differential with “On
      the Go” hydraulic differential lock. Final Drives: Angled drive shafts with planetary final drives or gear style drop boxes.
      Travel Speeds w/angle drive - MPH: (At
      2550 engine rpm) 1st gear: 8.7 mph; 2nd gear: 16.1 mph; 3rd gear: 21.2 mph; 4th gear: 30.6 mph; 5th gear 41.3 mph. Note: Speeds will vary depending on tire size.
      Travel Speeds w/drop box drive - MPH:
      (At 2550 engine rpm) 1st gear: 8.2 mph; 2nd gear: 15.1 mph; 3rd gear: 19.9 mph; 4th gear: 28.7; 5th gear 38.8 mph. Note: Speeds will vary depending on tire size. Travel Speeds w/angle drive - kph (At 2550 engine rpm) 1st gear: 14 kph 2nd gear: 25.9 kph 3rd gear: 34.1 kph 4th gear: 49.2 kph 5th gear 66.4 kph Note: Speeds will vary depending on tire size. Travel Speeds w/drop box drive - kph (At 2550 engine rpm) 1st gear: 13.2 kph 2nd gear: 24.3 kph 3rd gear: 32 kph 4th gear: 46.2 kph 5th gear 62.4 kph Note: Speeds will vary depending on tire size.
      Brakes: Parking: Spring applied -
      hydraulic release. Service: Two (2) Wheel heavy duty power discs on rear axle.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust and a 15' (4.6 m) turning radius. Suspension: Parallel drag link front and rear suspension, automatically adjusted integrated air ride system with sway control.
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank. Operates air ride suspension, optional boom blow out kit and foam marker.
      Auxiliary Hydraulic Circuit: 30 gpm
      (113.6 L) closed center pressure compensated, hydraulic pump with 2500 psi (172.4 bar) operating pressure.
      Dimensions: Width: 14' 3" (4.4m),
      Height 12' 11” (3.7 m), Length: 27’ 2” (8.3 m) (boom unfolded), crop clearance with angled drive shafts - 42" (106.7 cm), with drop boxes 48” (122 cm).
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Enhanced Rear View deluxe cab.
      Includes: Heat & air conditioning, pressurization, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, windshield wiper with washer, instructional seat along with a deluxe Air Ride operator's seat and 2 large outside mirrors. Hydraulic lift ladder and engine monitor system.
      Product Tank Options: 1000 or 1200
      gallon (3785 or 4542 L) poly or 1000 gallon (3785 L) stainless steel tank with baffles, deep sump, cradle, and 3 gallon (11.35 L) clean water hand wash tank.
      Product Circuit: ACE FMC-150F-206
      hydraulic drive pump with silicon carbide seal, mounted below the product tank to aid in priming. 100 GPM @ 88 PSI (378 L @ 6.07 bar) (pump capacity only). 2” (5.08 cm) hose between Y-Strainer and boom control valves. 2” (5.08 cm) hose between tank and pump. 1 1/2" (3.8 cm) poly regulating valve, TeeJet electric on/off boom ball valves, RFM60 flow meter and 2" (5.08 cm) fast fill kit. NOTE: Rate Controllers and Speed Sensors are NOT INCLUDED.
      Boom: Rear mount with nitrogen
      accumulator suspension. Truss Style booms feature tubular truss const. and 1" (2.5 cm) stainless steel boom lines. U.S. sizes - 90/60 or 100/60 ft. (27.3/18.3 or 30.5/18.3 m). 3 Way Nozzle bodies.
      Front & Rear Axle: Manually adjustable
      axles with wheel track adjustment between 120” to 150” (304.8 to 381 cm). Note: Tread width is based on 380/90R46 tires."
      Lighting & Markings:
      Forward Lighting: 4-highway headlights in front grill, 10-forward field working lights (4 in grill & 6 stadium) & 2 - amber warning/signals. Rear Lighting: 4 - working, 2 - backup, 2 - red tail/brake, 2 - red tail/single & 2 - amber warning/signal. Backup alarm,
    • Chassis: 42” or 48” (106.7 or 122 cm)
      Underbody clearance, C-channel frame, front mount engine with tip up hood, wheel legs widen individually, rear mount boom and fold up ladder located on left side.
      Engine: QSB 6.7 liter Cummins 240 HP
      (Power Bulge 250 HP) electronically controlled Tier III Engine, turbo charged with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 120 gallon (454 L) fuel tank.
      Engine Related Accessories: Electronic
      cruise control. Remote battery terminals. Transmission: Allison RDS 2500 Heavy duty 5-speed automatic transmission with locking torque converter.
      Differential: JCB rear differential with “On
      the Go” hydraulic differential lock. Final Drives: Angled drive shafts with planetary final drives or gear style drop boxes.
      Travel Speeds w/angle drive - MPH: (At
      2550 engine rpm) 1st gear: 8.7 mph; 2nd gear: 16.1 mph; 3rd gear: 21.2 mph; 4th gear: 30.6 mph; 5th gear 41.3 mph. Note: Speeds will vary depending on tire size.
      Travel Speeds w/drop box drive - MPH:
      (At 2550 engine rpm) 1st gear: 8.2 mph; 2nd gear: 15.1 mph; 3rd gear: 19.9 mph; 4th gear: 28.7; 5th gear 38.8 mph. Note: Speeds will vary depending on tire size. Travel Speeds w/angle drive - kph (At 2550 engine rpm) 1st gear: 14 kph 2nd gear: 25.9 kph 3rd gear: 34.1 kph 4th gear: 49.2 kph 5th gear 66.4 kph Note: Speeds will vary depending on tire size. Travel Speeds w/drop box drive - kph (At 2550 engine rpm) 1st gear: 13.2 kph 2nd gear: 24.3 kph 3rd gear: 32 kph 4th gear: 46.2 kph 5th gear 62.4 kph Note: Speeds will vary depending on tire size.
      Brakes: Parking: Spring applied -
      hydraulic release. Service: Two (2) Wheel heavy duty power discs on rear axle.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust and a 15' (4.6 m) turning radius. Suspension: Parallel drag link front and rear suspension, automatically adjusted integrated air ride system with sway control.
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank. Operates air ride suspension, optional boom blow out kit and foam marker.
      Auxiliary Hydraulic Circuit: 30 gpm
      (113.6 L) closed center pressure compensated, hydraulic pump with 2500 psi (172.4 bar) operating pressure.
      Dimensions: Width: 14' 3" (4.4m),
      Height 12' 11” (3.7 m), Length: 27’ 2” (8.3 m) (boom unfolded), crop clearance with angled drive shafts - 42" (106.7 cm), with drop boxes 48” (122 cm).
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Enhanced Rear View deluxe cab.
      Includes: Heat & air conditioning, pressurization, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, windshield wiper with washer, instructional seat along with a deluxe Air Ride operator's seat and 2 large outside mirrors. Hydraulic lift ladder and engine monitor system.
      Product Tank Options: 1000 or 1200
      gallon (3785 or 4542 L) poly or 1000 gallon (3785 L) stainless steel tank with baffles, deep sump, cradle, and 3 gallon (11.35 L) clean water hand wash tank.
      Product Circuit: ACE FMC-150F-206
      hydraulic drive pump with silicon carbide seal, mounted below the product tank to aid in priming. 100 GPM @ 88 PSI (378 L @ 6.07 bar) (pump capacity only). 2” (5.08 cm) hose between Y-Strainer and boom control valves. 2” (5.08 cm) hose between tank and pump. 1 1/2" (3.8 cm) poly regulating valve, TeeJet electric on/off boom ball valves, RFM60 flow meter and 2" (5.08 cm) fast fill kit. NOTE: Rate Controllers and Speed Sensors are NOT INCLUDED.
      Boom: Rear mount with nitrogen
      accumulator suspension. Truss Style booms feature tubular truss const. and 1" (2.5 cm) stainless steel boom lines. U.S. sizes - 90/60 or 100/60 ft. (27.3/18.3 or 30.5/18.3 m). 3 Way Nozzle bodies.
      Front & Rear Axle: Manually adjustable
      axles with wheel track adjustment between 120” to 150” (304.8 to 381 cm). Note: Tread width is based on 380/90R46 tires."
      Lighting & Markings:
      Forward Lighting: 4-highway headlights in front grill, 10-forward field working lights (4 in grill & 6 stadium) & 2 - amber warning/signals. Rear Lighting: 4 - working, 2 - backup, 2 - red tail/brake, 2 - red tail/single & 2 - amber warning/signal. Backup alarm,
  • SP.275F [ Versions ]
    • Engine: QSB 6.7 Liter Cummins 275
      H.P. electronically controlled Tier III engine, waste gate turbo charger with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 150 gallon (568 L) fuel tank.
      Transmission: Hydrostatic
      drive system with twin Sundstrand heavy duty pumps.
      Final Drives: 4-Wheel drive, Poclain®
      MS18 Dyna Plus wheel drive motors with 3-speed power shift.
      Travel Speed - MPH: 00-Cams: Range
      1: 0-14 mph; Range 2: 0-19 mph; Range 3: 0-29 mph. 02-Cams: (20% more torque) Range 1: 0-13.2 mph; Range 2: 0-17.8 mph; Range 3: 0-26.6 mph. Note: Speeds will vary depending on tire size.
      Travel Speed - kph: 00-Cams: Range 1:
      0-22.5 kph; Range 2: 0-30.5 kph; Range 3: 0-46.6 kph. 02-Cams: (20% more torque) Range 1: 0-21.2 kph; Range 2: 0-28.6 kph; Range 3: 0-42.8 kph. Note: Speeds will vary depending on tire size.
      Engine Related Accessories: Remote
      engine control, remote battery terminals for chemical transfer pumps and remote pump switch.
      Chassis: 72" (183 cm) under body
      clearance, front mount boom and cab, wheel legs widen equally on left and right side, mid-mount product tank, rear- mount engine and folding rear approach ladder with cat walk on left side.
      Brakes: Parking: 4-wheel, spring
      applied. Service: 4-wheel dynamic internal wet disc and oil cooled.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust with steering cylinders mounted on top of frame. 15’ (4.57 m) turning radius with standard 2 wheel steer.
      Suspension: 4-wheel independent
      suspension with integrated Hydraulic Leveling/Shock Absorber ride, auto leveling for each wheel leg, with a suspension travel of 20" (50.8 cm).
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank.
      Auxiliary Hydraulic Circuit: Closed center
      pressure compensated, hydraulic pump with 2500 psi (172.37 bar) operating pressure.
      Dimensions: Width: 12.8' (3.9 m)
      narrow, Width: 15.1' (4.6 m) wide, Crop Clearance: 72"" (183 cm) Height: 13.2' (4 m), Length: 30.3' (9.23 m) boom unfolded.
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Deluxe "Ultra Quiet" Cab.
      Includes: Air Ride cab suspension with leveling valve, pressurization, heat and air conditioning, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, long windshield wiper with washer, instructors seat along with a deluxe Air Ride, centerline mounted operators seat. Engine monitor system.
      Product Tank Options: 1200, 1400 or
      1600 gallon (4252, 5300 or 6056 L) stainless steel with full length sump product tanks. All tanks have adjustable agitation. Tanks are mounted crossways behind cab for superior weight distribution. 3 Gallon (11.35 L) hand wash tank.
      Rinse System: 150 Gallon (567.8 L)
      flush and rinse kit - mounts directly behind product tank. Includes separate 2” (5.08 cm) fast fill connection.
      Product Circuit: 9306C HM5C Hypro
      hydraulic drive pump with silicon seal, mounted horizontally below the product tank to aid in priming. 210 GPM @ 80 PSI (795 L @ 5.5 bar) pump capacity only, 3” (7.62 cm) suction/fill line. Hydraulic flow control valve, RFM 60 flow meter and 2” (5.8 cm) fast fill kit. 2" (5.08 cm) Product tank drain kit. NOTE: Rate Controllers & Speed Sensors are NOT INCLUDED.
      Bypass Line/Fill Circuit: 2” (5.08 cm)
      product tank Bypass/Fill line between Y- Strainer and product tank, includes one- way check valve. Useful for faster agitation while filling, prevents pressure spikes when optional electric bypass valve is ordered and you have the ability to fill product tank with the sprayer pump.
      Hardware: Stainless steel on boom and
      most frame parts.
      Boom: 1” (2.5 cm) Stainless steel lines.
      Front mount with nitrogen accumulator suspension. U.S. sizes - 90/60’, 100/60’ and 120/70’ ( 27.4/18.3, 30.48/18.3 and 36.5/21.3 m) 3 way nozzle bodies.
      Wheel Tread: Hydraulically adjustable
      tread width from 120" (304.8 cm) narrow to 160" (406.4 cm) wide. 18" (45.7 cm) leg profile at wheel drive hub. Includes tread width locking valve. Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting -2 high/low beam headlights, 4 working lights, 6 stadium working lights & 4 amber warning/signals. Rear Lighting -2 working/backup, 2 red tail/brake, 2 tail/signal & 2 amber warning/signal. Backup alarm. SMV sign
    • Engine: QSB 6.7 Liter Cummins 275
      H.P. electronically controlled Tier III engine, waste gate turbo charger with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 150 gallon (568 L) fuel tank.
      Transmission: Hydrostatic
      drive system with twin Sundstrand heavy duty pumps.
      Final Drives: 4-Wheel drive, Poclain®
      MS18 Dyna Plus wheel drive motors with 3-speed power shift.
      Travel Speed - MPH: 00-Cams: Range
      1: 0-14 mph; Range 2: 0-19 mph; Range 3: 0-29 mph. 02-Cams: (20% more torque) Range 1: 0-13.2 mph; Range 2: 0-17.8 mph; Range 3: 0-26.6 mph. Note: Speeds will vary depending on tire size.
      Travel Speed - kph: 00-Cams: Range 1:
      0-22.5 kph; Range 2: 0-30.5 kph; Range 3: 0-46.6 kph. 02-Cams: (20% more torque) Range 1: 0-21.2 kph; Range 2: 0-28.6 kph; Range 3: 0-42.8 kph. Note: Speeds will vary depending on tire size.
      Engine Related Accessories: Remote
      engine control, remote battery terminals for chemical transfer pumps and remote pump switch.
      Chassis: 72" (183 cm) under body
      clearance, front mount boom and cab, wheel legs widen equally on left and right side, mid-mount product tank, rear- mount engine and folding rear approach ladder with cat walk on left side.
      Brakes: Parking: 4-wheel, spring
      applied. Service: 4-wheel dynamic internal wet disc and oil cooled.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust with steering cylinders mounted on top of frame. 15’ (4.57 m) turning radius with standard 2 wheel steer.
      Suspension: 4-wheel independent
      suspension with integrated Hydraulic Leveling/Shock Absorber ride, auto leveling for each wheel leg, with a suspension travel of 20" (50.8 cm).
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank.
      Auxiliary Hydraulic Circuit: Closed center
      pressure compensated, hydraulic pump with 2500 psi (172.37 bar) operating pressure.
      Dimensions: Width: 12.8' (3.9 m)
      narrow, Width: 15.1' (4.6 m) wide, Crop Clearance: 72"" (183 cm) Height: 13.2' (4 m), Length: 30.3' (9.23 m) boom unfolded.
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Deluxe "Ultra Quiet" Cab.
      Includes: Air Ride cab suspension with leveling valve, pressurization, heat and air conditioning, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, long windshield wiper with washer, instructors seat along with a deluxe Air Ride, centerline mounted operators seat. Engine monitor system.
      Product Tank Options: 1200, 1400 or
      1600 gallon (4252, 5300 or 6056 L) stainless steel with full length sump product tanks. All tanks have adjustable agitation. Tanks are mounted crossways behind cab for superior weight distribution. 3 Gallon (11.35 L) hand wash tank.
      Rinse System: 150 Gallon (567.8 L)
      flush and rinse kit - mounts directly behind product tank. Includes separate 2” (5.08 cm) fast fill connection.
      Product Circuit: 9306C HM5C Hypro
      hydraulic drive pump with silicon seal, mounted horizontally below the product tank to aid in priming. 210 GPM @ 80 PSI (795 L @ 5.5 bar) pump capacity only, 3” (7.62 cm) suction/fill line. Hydraulic flow control valve, RFM 60 flow meter and 2” (5.8 cm) fast fill kit. 2" (5.08 cm) Product tank drain kit. NOTE: Rate Controllers & Speed Sensors are NOT INCLUDED.
      Bypass Line/Fill Circuit: 2” (5.08 cm)
      product tank Bypass/Fill line between Y- Strainer and product tank, includes one- way check valve. Useful for faster agitation while filling, prevents pressure spikes when optional electric bypass valve is ordered and you have the ability to fill product tank with the sprayer pump.
      Hardware: Stainless steel on boom and
      most frame parts.
      Boom: 1” (2.5 cm) Stainless steel lines.
      Front mount with nitrogen accumulator suspension. U.S. sizes - 90/60’, 100/60’ and 120/70’ ( 27.4/18.3, 30.48/18.3 and 36.5/21.3 m) 3 way nozzle bodies.
      Wheel Tread: Hydraulically adjustable
      tread width from 120" (304.8 cm) narrow to 160" (406.4 cm) wide. 18" (45.7 cm) leg profile at wheel drive hub. Includes tread width locking valve. Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting -2 high/low beam headlights, 4 working lights, 6 stadium working lights & 4 amber warning/signals. Rear Lighting -2 working/backup, 2 red tail/brake, 2 tail/signal & 2 amber warning/signal. Backup alarm. SMV sign
    • Engine: QSB 6.7 Liter Cummins 275
      H.P. electronically controlled Tier III engine, waste gate turbo charger with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 150 gallon (568 L) fuel tank.
      Transmission: Hydrostatic
      drive system with twin Sundstrand heavy duty pumps.
      Final Drives: 4-Wheel drive, Poclain®
      MS18 Dyna Plus wheel drive motors with 3-speed power shift.
      Travel Speed - MPH: 00-Cams: Range
      1: 0-14 mph; Range 2: 0-19 mph; Range 3: 0-29 mph. 02-Cams: (20% more torque) Range 1: 0-13.2 mph; Range 2: 0-17.8 mph; Range 3: 0-26.6 mph. Note: Speeds will vary depending on tire size.
      Travel Speed - kph: 00-Cams: Range 1:
      0-22.5 kph; Range 2: 0-30.5 kph; Range 3: 0-46.6 kph. 02-Cams: (20% more torque) Range 1: 0-21.2 kph; Range 2: 0-28.6 kph; Range 3: 0-42.8 kph. Note: Speeds will vary depending on tire size.
      Engine Related Accessories: Remote
      engine control, remote battery terminals for chemical transfer pumps and remote pump switch.
      Chassis: 72" (183 cm) under body
      clearance, front mount boom and cab, wheel legs widen equally on left and right side, mid-mount product tank, rear- mount engine and folding rear approach ladder with cat walk on left side.
      Brakes: Parking: 4-wheel, spring
      applied. Service: 4-wheel dynamic internal wet disc and oil cooled.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust with steering cylinders mounted on top of frame. 15’ (4.57 m) turning radius with standard 2 wheel steer.
      Suspension: 4-wheel independent
      suspension with integrated Hydraulic Leveling/Shock Absorber ride, auto leveling for each wheel leg, with a suspension travel of 20" (50.8 cm).
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank.
      Auxiliary Hydraulic Circuit: Closed center
      pressure compensated, hydraulic pump with 2500 psi (172.37 bar) operating pressure.
      Dimensions: Width: 12.8' (3.9 m)
      narrow, Width: 15.1' (4.6 m) wide, Crop Clearance: 72"" (183 cm) Height: 13.2' (4 m), Length: 30.3' (9.23 m) boom unfolded.
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Deluxe "Ultra Quiet" Cab.
      Includes: Air Ride cab suspension with leveling valve, pressurization, heat and air conditioning, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, long windshield wiper with washer, instructors seat along with a deluxe Air Ride, centerline mounted operators seat. Engine monitor system.
      Product Tank Options: 1200, 1400 or
      1600 gallon (4252, 5300 or 6056 L) stainless steel with full length sump product tanks. All tanks have adjustable agitation. Tanks are mounted crossways behind cab for superior weight distribution. 3 Gallon (11.35 L) hand wash tank.
      Rinse System: 150 Gallon (567.8 L)
      flush and rinse kit - mounts directly behind product tank. Includes separate 2” (5.08 cm) fast fill connection.
      Product Circuit: 9306C HM5C Hypro
      hydraulic drive pump with silicon seal, mounted horizontally below the product tank to aid in priming. 210 GPM @ 80 PSI (795 L @ 5.5 bar) pump capacity only, 3” (7.62 cm) suction/fill line. Hydraulic flow control valve, RFM 60 flow meter and 2” (5.8 cm) fast fill kit. 2" (5.08 cm) Product tank drain kit. NOTE: Rate Controllers & Speed Sensors are NOT INCLUDED.
      Bypass Line/Fill Circuit: 2” (5.08 cm)
      product tank Bypass/Fill line between Y- Strainer and product tank, includes one- way check valve. Useful for faster agitation while filling, prevents pressure spikes when optional electric bypass valve is ordered and you have the ability to fill product tank with the sprayer pump.
      Hardware: Stainless steel on boom and
      most frame parts.
      Boom: 1” (2.5 cm) Stainless steel lines.
      Front mount with nitrogen accumulator suspension. U.S. sizes - 90/60’, 100/60’ and 120/70’ ( 27.4/18.3, 30.48/18.3 and 36.5/21.3 m) 3 way nozzle bodies.
      Wheel Tread: Hydraulically adjustable
      tread width from 120" (304.8 cm) narrow to 160" (406.4 cm) wide. 18" (45.7 cm) leg profile at wheel drive hub. Includes tread width locking valve. Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting -2 high/low beam headlights, 4 working lights, 6 stadium working lights & 4 amber warning/signals. Rear Lighting -2 working/backup, 2 red tail/brake, 2 tail/signal & 2 amber warning/signal. Backup alarm. SMV sign
  • SP.275R [ Versions ]
    • Chassis: 48” (122 cm) Underbody
      clearance, C-channel frame, front mount engine with tip up hood, wheel legs widen individually, rear mount boom and fold up ladder located on left side.
      Engine: QSB 6.7 liter Cummins 275 HP
      electronically controlled Tier III Engine, turbo charged with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 120 gallon (454 L) fuel tank.
      Engine Related Accessories: Electronic
      cruise control. Remote battery terminals. Transmission: Allison RDS 3000 Heavy duty 6-speed automatic transmission with locking torque converter.
      Differential: Axle-Tech rear differential
      with "Limited Slip" feature. Final Drives: Gear style drop boxes.
      Travel Speeds - MPH: (At 2550 engine
      RPM) 1st gear: 8.2 mph; 2nd gear: 15.4 mph; 3rd gear: 20.4 mph; 4th gear: 28.7 mph, 5th gear 38.3 mph and 6th gear 44.2 mph. Note: Speeds will vary depending on tire size.
      Travel Speeds - kph: (At 2550 engine
      RPM) 1st gear: 13.2 kph; 2nd gear: 24.7 kph; 3rd gear: 32.8 kph;4th gear: 46.2 kph; 5th gear 61.6 kph and 71.1 kph. Note: Speeds will vary depending on tire size.
      Brakes: Parking: Spring applied -
      hydraulic release. Service: Four (4) Wheel heavy duty power discs on front and rear wheels.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust and a 15' (4.6 m) turning radius. Suspension: Parallel drag link front and rear suspension, automatically adjusted integrated air ride system with sway control.
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank. Operates air ride suspension, optional boom blow out kit and foam marker.
      Auxiliary Hydraulic Circuit: 49 gpm
      (185.5 L) closed center pressure compensated, hydraulic pump with 2500 psi (172.4 bar) operating pressure.
      Dimensions: Width: 14' 3" (4.4 m),
      Height: 12' 11” (3.7 m), Length: 27’ 2” (8.3 m) (boom unfolded), crop clearance with drop boxes 48” (122 cm).
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Enhanced Rear View deluxe cab.
      Includes: Heat & air conditioning, pressurization, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, windshield wiper with washer, instructional seat along with a deluxe Air Ride operator's seat and 2 large outside mirrors. Hydraulic lift ladder and engine monitor system.
      Product Tank Options: 1000 or 1200
      gallon (3785 or 4542) poly or stainless steel tank with baffles, deep sump, and 3 gallon (11.35 L) clean water hand wash tank.
      Product Circuit: ACE FMC-200F-HYD-
      304 hydraulic drive pump with silicon carbide seal, mounted below the product tank to aid in priming. 160 GPM @ 65 PSI (606 L @ 4.48 bar) (pump capacity only). 2” (5.08 cm) hose between Y- Strainer and boom control valves. 3” (7.6 cm) hose between tank and pump. 1 1/2" (3.8 cm) regulating valve, TeeJet electric on/off boom ball valves, RFM 60 flow meter and 3" (7.6 cm) fast fill kit. NOTE: Rate Controllers and Speed Sensors are NOT INCLUDED.
      Boom: Rear mount with nitrogen
      accumulator suspension. Truss Style booms feature tubular truss const. and 1" (2.5 cm) stainless steel boom lines. U.S. sizes - 90/60 or 100/60 ft. (27.3/18.3 or 30.5/18.3 m). 3 Way Nozzle bodies.
      Front & Rear Axle: Manually adjustable
      axles with wheel track adjustment between 120” to 150” (304.8 to 381 cm). Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting: 4-highway headlights in front grill, 10-forward field working lights (4 in grill & 6 stadium) & 2 - amber warning/signals. Rear Lighting: 4 - working, 2 - backup, 2 - red tail/brake, 2 - red tail/single & 2 - amber warning/signal. Backup alarm,
    • Chassis: 48” (122 cm) Underbody
      clearance, C-channel frame, front mount engine with tip up hood, wheel legs widen individually, rear mount boom and fold up ladder located on left side.
      Engine: QSB 6.7 liter Cummins 275 HP
      electronically controlled Tier III Engine, turbo charged with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 120 gallon (454 L) fuel tank.
      Engine Related Accessories: Electronic
      cruise control. Remote battery terminals. Transmission: Allison RDS 3000 Heavy duty 6-speed automatic transmission with locking torque converter.
      Differential: Axle-Tech rear differential
      with "Limited Slip" feature. Final Drives: Gear style drop boxes.
      Travel Speeds - MPH: (At 2550 engine
      RPM) 1st gear: 8.2 mph; 2nd gear: 15.4 mph; 3rd gear: 20.4 mph; 4th gear: 28.7 mph, 5th gear 38.3 mph and 6th gear 44.2 mph. Note: Speeds will vary depending on tire size.
      Travel Speeds - kph: (At 2550 engine
      RPM) 1st gear: 13.2 kph; 2nd gear: 24.7 kph; 3rd gear: 32.8 kph;4th gear: 46.2 kph; 5th gear 61.6 kph and 71.1 kph. Note: Speeds will vary depending on tire size.
      Brakes: Parking: Spring applied -
      hydraulic release. Service: Four (4) Wheel heavy duty power discs on front and rear wheels.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust and a 15' (4.6 m) turning radius. Suspension: Parallel drag link front and rear suspension, automatically adjusted integrated air ride system with sway control.
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank. Operates air ride suspension, optional boom blow out kit and foam marker.
      Auxiliary Hydraulic Circuit: 49 gpm
      (185.5 L) closed center pressure compensated, hydraulic pump with 2500 psi (172.4 bar) operating pressure.
      Dimensions: Width: 14' 3" (4.4 m),
      Height: 12' 11” (3.7 m), Length: 27’ 2” (8.3 m) (boom unfolded), crop clearance with drop boxes 48” (122 cm).
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Enhanced Rear View deluxe cab.
      Includes: Heat & air conditioning, pressurization, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, windshield wiper with washer, instructional seat along with a deluxe Air Ride operator's seat and 2 large outside mirrors. Hydraulic lift ladder and engine monitor system.
      Product Tank Options: 1000 or 1200
      gallon (3785 or 4542) poly or stainless steel tank with baffles, deep sump, and 3 gallon (11.35 L) clean water hand wash tank.
      Product Circuit: ACE FMC-200F-HYD-
      304 hydraulic drive pump with silicon carbide seal, mounted below the product tank to aid in priming. 160 GPM @ 65 PSI (606 L @ 4.48 bar) (pump capacity only). 2” (5.08 cm) hose between Y- Strainer and boom control valves. 3” (7.6 cm) hose between tank and pump. 1 1/2" (3.8 cm) regulating valve, TeeJet electric on/off boom ball valves, RFM 60 flow meter and 3" (7.6 cm) fast fill kit. NOTE: Rate Controllers and Speed Sensors are NOT INCLUDED.
      Boom: Rear mount with nitrogen
      accumulator suspension. Truss Style booms feature tubular truss const. and 1" (2.5 cm) stainless steel boom lines. U.S. sizes - 90/60 or 100/60 ft. (27.3/18.3 or 30.5/18.3 m). 3 Way Nozzle bodies.
      Front & Rear Axle: Manually adjustable
      axles with wheel track adjustment between 120” to 150” (304.8 to 381 cm). Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting: 4-highway headlights in front grill, 10-forward field working lights (4 in grill & 6 stadium) & 2 - amber warning/signals. Rear Lighting: 4 - working, 2 - backup, 2 - red tail/brake, 2 - red tail/single & 2 - amber warning/signal. Backup alarm,
    • Chassis: 48” (122 cm) Underbody
      clearance, C-channel frame, front mount engine with tip up hood, wheel legs widen individually, rear mount boom and fold up ladder located on left side.
      Engine: QSB 6.7 liter Cummins 275 HP
      electronically controlled Tier III Engine, turbo charged with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 120 gallon (454 L) fuel tank.
      Engine Related Accessories: Electronic
      cruise control. Remote battery terminals. Transmission: Allison RDS 3000 Heavy duty 6-speed automatic transmission with locking torque converter.
      Differential: Axle-Tech rear differential
      with "Limited Slip" feature. Final Drives: Gear style drop boxes.
      Travel Speeds - MPH: (At 2550 engine
      RPM) 1st gear: 8.2 mph; 2nd gear: 15.4 mph; 3rd gear: 20.4 mph; 4th gear: 28.7 mph, 5th gear 38.3 mph and 6th gear 44.2 mph. Note: Speeds will vary depending on tire size.
      Travel Speeds - kph: (At 2550 engine
      RPM) 1st gear: 13.2 kph; 2nd gear: 24.7 kph; 3rd gear: 32.8 kph;4th gear: 46.2 kph; 5th gear 61.6 kph and 71.1 kph. Note: Speeds will vary depending on tire size.
      Brakes: Parking: Spring applied -
      hydraulic release. Service: Four (4) Wheel heavy duty power discs on front and rear wheels.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust and a 15' (4.6 m) turning radius. Suspension: Parallel drag link front and rear suspension, automatically adjusted integrated air ride system with sway control.
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank. Operates air ride suspension, optional boom blow out kit and foam marker.
      Auxiliary Hydraulic Circuit: 49 gpm
      (185.5 L) closed center pressure compensated, hydraulic pump with 2500 psi (172.4 bar) operating pressure.
      Dimensions: Width: 14' 3" (4.4 m),
      Height: 12' 11” (3.7 m), Length: 27’ 2” (8.3 m) (boom unfolded), crop clearance with drop boxes 48” (122 cm).
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Enhanced Rear View deluxe cab.
      Includes: Heat & air conditioning, pressurization, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, windshield wiper with washer, instructional seat along with a deluxe Air Ride operator's seat and 2 large outside mirrors. Hydraulic lift ladder and engine monitor system.
      Product Tank Options: 1000 or 1200
      gallon (3785 or 4542) poly or stainless steel tank with baffles, deep sump, and 3 gallon (11.35 L) clean water hand wash tank.
      Product Circuit: ACE FMC-200F-HYD-
      304 hydraulic drive pump with silicon carbide seal, mounted below the product tank to aid in priming. 160 GPM @ 65 PSI (606 L @ 4.48 bar) (pump capacity only). 2” (5.08 cm) hose between Y- Strainer and boom control valves. 3” (7.6 cm) hose between tank and pump. 1 1/2" (3.8 cm) regulating valve, TeeJet electric on/off boom ball valves, RFM 60 flow meter and 3" (7.6 cm) fast fill kit. NOTE: Rate Controllers and Speed Sensors are NOT INCLUDED.
      Boom: Rear mount with nitrogen
      accumulator suspension. Truss Style booms feature tubular truss const. and 1" (2.5 cm) stainless steel boom lines. U.S. sizes - 90/60 or 100/60 ft. (27.3/18.3 or 30.5/18.3 m). 3 Way Nozzle bodies.
      Front & Rear Axle: Manually adjustable
      axles with wheel track adjustment between 120” to 150” (304.8 to 381 cm). Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting: 4-highway headlights in front grill, 10-forward field working lights (4 in grill & 6 stadium) & 2 - amber warning/signals. Rear Lighting: 4 - working, 2 - backup, 2 - red tail/brake, 2 - red tail/single & 2 - amber warning/signal. Backup alarm,
    • Chassis: 48” (122 cm) Underbody
      clearance, C-channel frame, front mount engine with tip up hood, wheel legs widen individually, rear mount boom and fold up ladder located on left side.
      Engine: QSB 6.7 liter Cummins 275 HP
      electronically controlled Tier III Engine, turbo charged with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 120 gallon (454 L) fuel tank.
      Engine Related Accessories: Electronic
      cruise control. Remote battery terminals. Transmission: Allison RDS 3000 Heavy duty 6-speed automatic transmission with locking torque converter.
      Differential: Axle-Tech rear differential
      with "Limited Slip" feature. Final Drives: Gear style drop boxes.
      Travel Speeds - MPH: (At 2550 engine
      RPM) 1st gear: 8.2 mph; 2nd gear: 15.4 mph; 3rd gear: 20.4 mph; 4th gear: 28.7 mph, 5th gear 38.3 mph and 6th gear 44.2 mph. Note: Speeds will vary depending on tire size.
      Travel Speeds - kph: (At 2550 engine
      RPM) 1st gear: 13.2 kph; 2nd gear: 24.7 kph; 3rd gear: 32.8 kph;4th gear: 46.2 kph; 5th gear 61.6 kph and 71.1 kph. Note: Speeds will vary depending on tire size.
      Brakes: Parking: Spring applied -
      hydraulic release. Service: Four (4) Wheel heavy duty power discs on front and rear wheels.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust and a 15' (4.6 m) turning radius. Suspension: Parallel drag link front and rear suspension, automatically adjusted integrated air ride system with sway control.
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank. Operates air ride suspension, optional boom blow out kit and foam marker.
      Auxiliary Hydraulic Circuit: 49 gpm
      (185.5 L) closed center pressure compensated, hydraulic pump with 2500 psi (172.4 bar) operating pressure.
      Dimensions: Width: 14' 3" (4.4 m),
      Height: 12' 11” (3.7 m), Length: 27’ 2” (8.3 m) (boom unfolded), crop clearance with drop boxes 48” (122 cm).
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Enhanced Rear View deluxe cab.
      Includes: Heat & air conditioning, pressurization, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, windshield wiper with washer, instructional seat along with a deluxe Air Ride operator's seat and 2 large outside mirrors. Hydraulic lift ladder and engine monitor system.
      Product Tank Options: 1000 or 1200
      gallon (3785 or 4542) poly or stainless steel tank with baffles, deep sump, and 3 gallon (11.35 L) clean water hand wash tank.
      Product Circuit: ACE FMC-200F-HYD-
      304 hydraulic drive pump with silicon carbide seal, mounted below the product tank to aid in priming. 160 GPM @ 65 PSI (606 L @ 4.48 bar) (pump capacity only). 2” (5.08 cm) hose between Y- Strainer and boom control valves. 3” (7.6 cm) hose between tank and pump. 1 1/2" (3.8 cm) regulating valve, TeeJet electric on/off boom ball valves, RFM 60 flow meter and 3" (7.6 cm) fast fill kit. NOTE: Rate Controllers and Speed Sensors are NOT INCLUDED.
      Boom: Rear mount with nitrogen
      accumulator suspension. Truss Style booms feature tubular truss const. and 1" (2.5 cm) stainless steel boom lines. U.S. sizes - 90/60 or 100/60 ft. (27.3/18.3 or 30.5/18.3 m). 3 Way Nozzle bodies.
      Front & Rear Axle: Manually adjustable
      axles with wheel track adjustment between 120” to 150” (304.8 to 381 cm). Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting: 4-highway headlights in front grill, 10-forward field working lights (4 in grill & 6 stadium) & 2 - amber warning/signals. Rear Lighting: 4 - working, 2 - backup, 2 - red tail/brake, 2 - red tail/single & 2 - amber warning/signal. Backup alarm,
  • SP.365F [ Versions ]
    • Engine: QSL 8.9 Liter Cummins 365
      H.P. (Power bulge 375 H.P.) electronically controlled Tier III engine, waste gate turbo charger with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 150 gallon (568 L) fuel tank.
      Transmission: Torq-Trac® hydrostatic
      drive system with twin 130 CC Sundstrand heavy-duty pumps.
      Final Drives: 4-Wheel drive, Poclain®
      MW24 Dyna Plus wheel drive motors with 5-speed power shift. Note: Speeds will vary depending on tire size.
      Travel Speed - MPH: Range 1: 0-10.1
      mph; Range 2: 0-13.2 mph; Range 3: 0- 19.1 mph; Range 4: 0-23.6 mph; Range 5: 0-31 mph. Note: Speeds will vary depending on tire size.
      Travel Speed - kph: Range 1: 0-16.3
      kph; Range 2: 0-21.2 kph; Range 3: 0- 30.7 kph; Range 4: 0-38 kph; Range 5: 0-49.9 kph. Note: Speeds will vary depending on tire size.
      Engine Related Accessories: Remote
      engine control, remote battery terminals for chemical transfer pumps and remote pump switch.
      Chassis: 72" (183 cm) under body
      clearance, front mount boom and cab, wheel legs widen equally on left and right side, mid-mount product tank, rear- mount engine and folding rear approach ladder with cat walk on left side.
      Brakes: Parking: 4-wheel, spring
      applied. Service: 4-wheel dynamic internal wet disc and oil cooled.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust with steering cylinders mounted on top of frame. 15’ (4.57 m) turning radius with standard 2 wheel steer.
      Suspension: 4-wheel independent
      suspension with integrated Hydraulic Leveling/Shock Absorber ride, auto leveling for each wheel leg, with a suspension travel of 20" (50.8 cm).
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank.
      Auxiliary Hydraulic Circuit: Closed center
      pressure compensated, hydraulic pump with 2500 psi (172.37 bar) operating pressure.
      Dimensions: Width: 12.8' (3.9 m)
      narrow, Width: 15.1' (4.6 m) wide, Crop Clearance: 72" (183 cm) Height: 13.2' (4 m), Length: 30.3' (9.23 m) boom unfolded.
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Deluxe "Ultra Quiet” cab.
      Includes: Air Ride cab suspension with leveling valve, pressurization, heat and air conditioning, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, long windshield wiper with washer, instructors seat along with a deluxe Air Ride, centerline mounted operators seat. Engine monitor system.
      Product Tank Options: 1200, 1400 or
      1600 gallon (4252, 5300 or 6056 L) stainless steel with full length sump product tanks. All tanks have adjustable agitation. Tanks are mounted crossways behind cab for superior weight distribution. 3 Gallon (11.35 L) hand wash tank.
      Rinse System: 150 Gallon (567.8 L)
      flush and rinse kit - mounts directly behind product tank. Includes separate 2” (5.08 cm) fast fill connection.
      Product Circuit: 9306C HM5C Hypro
      hydraulic drive pump with silicon seal, mounted horizontally below the product tank to aid in priming. 210 GPM @ 80 PSI (795 L @ 5.5 bar) pump capacity only, 3” (7.62 cm) suction/fill line. Hydraulic flow control valve, RFM 60 flow meter and 2” (5.8 cm) fast fill kit. 2" (5.08 cm) Product tank drain kit. NOTE: Rate Controllers & Speed Sensors are NOT INCLUDED.
      Bypass Line/Fill Circuit: 2” (5.08 cm)
      product tank Bypass/Fill line between Y- Strainer and product tank, includes one- way check valve. Useful for faster agitation while filling, prevents pressure spikes when optional electric bypass valve is ordered and you have the ability to fill product tank with the sprayer pump.
      Hardware: Stainless steel on boom and
      most frame parts.
      Boom: 1” (2.5 cm) Stainless steel lines.
      Front mount with nitrogen accumulator suspension. U.S. sizes - 90/60’, 100/60’ and 120/70’ ( 27.4/18.3, 30.48/18.3 and 36.5/21.3 m) Metric sizes - 30/18, 32/18 and 36/22 m. 3 way nozzle bodies.
      Wheel Tread: Hydraulically adjustable
      tread width from 120" (304.8 cm) narrow to 160" (406.4 cm) wide. 18" (45.7 cm) leg profile at wheel drive hub. Includes tread width locking valve. Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting -2 high/low beam headlights, 4 working lights, 6 stadium working lights & 4 amber warning/signals. Rear Lighting -2 working/backup, 2 red tail/brake, 2 tail/signal & 2 amber warning/signal. Backup alarm. SMV sign
    • Engine: QSL 8.9 Liter Cummins 365
      H.P. (Power bulge 375 H.P.) electronically controlled Tier III engine, waste gate turbo charger with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 150 gallon (568 L) fuel tank.
      Transmission: Torq-Trac® hydrostatic
      drive system with twin 130 CC Sundstrand heavy-duty pumps.
      Final Drives: 4-Wheel drive, Poclain®
      MW24 Dyna Plus wheel drive motors with 5-speed power shift. Note: Speeds will vary depending on tire size.
      Travel Speed - MPH: Range 1: 0-10.1
      mph; Range 2: 0-13.2 mph; Range 3: 0- 19.1 mph; Range 4: 0-23.6 mph; Range 5: 0-31 mph. Note: Speeds will vary depending on tire size.
      Travel Speed - kph: Range 1: 0-16.3
      kph; Range 2: 0-21.2 kph; Range 3: 0- 30.7 kph; Range 4: 0-38 kph; Range 5: 0-49.9 kph. Note: Speeds will vary depending on tire size.
      Engine Related Accessories: Remote
      engine control, remote battery terminals for chemical transfer pumps and remote pump switch.
      Chassis: 72" (183 cm) under body
      clearance, front mount boom and cab, wheel legs widen equally on left and right side, mid-mount product tank, rear- mount engine and folding rear approach ladder with cat walk on left side.
      Brakes: Parking: 4-wheel, spring
      applied. Service: 4-wheel dynamic internal wet disc and oil cooled.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust with steering cylinders mounted on top of frame. 15’ (4.57 m) turning radius with standard 2 wheel steer.
      Suspension: 4-wheel independent
      suspension with integrated Hydraulic Leveling/Shock Absorber ride, auto leveling for each wheel leg, with a suspension travel of 20" (50.8 cm).
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank.
      Auxiliary Hydraulic Circuit: Closed center
      pressure compensated, hydraulic pump with 2500 psi (172.37 bar) operating pressure.
      Dimensions: Width: 12.8' (3.9 m)
      narrow, Width: 15.1' (4.6 m) wide, Crop Clearance: 72" (183 cm) Height: 13.2' (4 m), Length: 30.3' (9.23 m) boom unfolded.
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Deluxe "Ultra Quiet” cab.
      Includes: Air Ride cab suspension with leveling valve, pressurization, heat and air conditioning, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, long windshield wiper with washer, instructors seat along with a deluxe Air Ride, centerline mounted operators seat. Engine monitor system.
      Product Tank Options: 1200, 1400 or
      1600 gallon (4252, 5300 or 6056 L) stainless steel with full length sump product tanks. All tanks have adjustable agitation. Tanks are mounted crossways behind cab for superior weight distribution. 3 Gallon (11.35 L) hand wash tank.
      Rinse System: 150 Gallon (567.8 L)
      flush and rinse kit - mounts directly behind product tank. Includes separate 2” (5.08 cm) fast fill connection.
      Product Circuit: 9306C HM5C Hypro
      hydraulic drive pump with silicon seal, mounted horizontally below the product tank to aid in priming. 210 GPM @ 80 PSI (795 L @ 5.5 bar) pump capacity only, 3” (7.62 cm) suction/fill line. Hydraulic flow control valve, RFM 60 flow meter and 2” (5.8 cm) fast fill kit. 2" (5.08 cm) Product tank drain kit. NOTE: Rate Controllers & Speed Sensors are NOT INCLUDED.
      Bypass Line/Fill Circuit: 2” (5.08 cm)
      product tank Bypass/Fill line between Y- Strainer and product tank, includes one- way check valve. Useful for faster agitation while filling, prevents pressure spikes when optional electric bypass valve is ordered and you have the ability to fill product tank with the sprayer pump.
      Hardware: Stainless steel on boom and
      most frame parts.
      Boom: 1” (2.5 cm) Stainless steel lines.
      Front mount with nitrogen accumulator suspension. U.S. sizes - 90/60’, 100/60’ and 120/70’ ( 27.4/18.3, 30.48/18.3 and 36.5/21.3 m) Metric sizes - 30/18, 32/18 and 36/22 m. 3 way nozzle bodies.
      Wheel Tread: Hydraulically adjustable
      tread width from 120" (304.8 cm) narrow to 160" (406.4 cm) wide. 18" (45.7 cm) leg profile at wheel drive hub. Includes tread width locking valve. Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting -2 high/low beam headlights, 4 working lights, 6 stadium working lights & 4 amber warning/signals. Rear Lighting -2 working/backup, 2 red tail/brake, 2 tail/signal & 2 amber warning/signal. Backup alarm. SMV sign
    • Engine: QSL 8.9 Liter Cummins 365
      H.P. (Power bulge 375 H.P.) electronically controlled Tier III engine, waste gate turbo charger with air to air after cooling, engine muffler, 160 amp alternator, two heavy duty batteries and 150 gallon (568 L) fuel tank.
      Transmission: Torq-Trac® hydrostatic
      drive system with twin 130 CC Sundstrand heavy-duty pumps.
      Final Drives: 4-Wheel drive, Poclain®
      MW24 Dyna Plus wheel drive motors with 5-speed power shift. Note: Speeds will vary depending on tire size.
      Travel Speed - MPH: Range 1: 0-10.1
      mph; Range 2: 0-13.2 mph; Range 3: 0- 19.1 mph; Range 4: 0-23.6 mph; Range 5: 0-31 mph. Note: Speeds will vary depending on tire size.
      Travel Speed - kph: Range 1: 0-16.3
      kph; Range 2: 0-21.2 kph; Range 3: 0- 30.7 kph; Range 4: 0-38 kph; Range 5: 0-49.9 kph. Note: Speeds will vary depending on tire size.
      Engine Related Accessories: Remote
      engine control, remote battery terminals for chemical transfer pumps and remote pump switch.
      Chassis: 72" (183 cm) under body
      clearance, front mount boom and cab, wheel legs widen equally on left and right side, mid-mount product tank, rear- mount engine and folding rear approach ladder with cat walk on left side.
      Brakes: Parking: 4-wheel, spring
      applied. Service: 4-wheel dynamic internal wet disc and oil cooled.
      Steering: Hydrostatic power steering
      with two steering cylinders, no tie rods to adjust with steering cylinders mounted on top of frame. 15’ (4.57 m) turning radius with standard 2 wheel steer.
      Suspension: 4-wheel independent
      suspension with integrated Hydraulic Leveling/Shock Absorber ride, auto leveling for each wheel leg, with a suspension travel of 20" (50.8 cm).
      Air System: Direct engine driven, water
      cooled air compressor and air storage tank.
      Auxiliary Hydraulic Circuit: Closed center
      pressure compensated, hydraulic pump with 2500 psi (172.37 bar) operating pressure.
      Dimensions: Width: 12.8' (3.9 m)
      narrow, Width: 15.1' (4.6 m) wide, Crop Clearance: 72" (183 cm) Height: 13.2' (4 m), Length: 30.3' (9.23 m) boom unfolded.
      Paint: Epoxy primer and urethane top
      coat with media-blast prepared surface.
      Cab: Deluxe "Ultra Quiet” cab.
      Includes: Air Ride cab suspension with leveling valve, pressurization, heat and air conditioning, charcoal cab filter, AM/FM/WX radio with CD player, tilt/telescopic steering wheel, long windshield wiper with washer, instructors seat along with a deluxe Air Ride, centerline mounted operators seat. Engine monitor system.
      Product Tank Options: 1200, 1400 or
      1600 gallon (4252, 5300 or 6056 L) stainless steel with full length sump product tanks. All tanks have adjustable agitation. Tanks are mounted crossways behind cab for superior weight distribution. 3 Gallon (11.35 L) hand wash tank.
      Rinse System: 150 Gallon (567.8 L)
      flush and rinse kit - mounts directly behind product tank. Includes separate 2” (5.08 cm) fast fill connection.
      Product Circuit: 9306C HM5C Hypro
      hydraulic drive pump with silicon seal, mounted horizontally below the product tank to aid in priming. 210 GPM @ 80 PSI (795 L @ 5.5 bar) pump capacity only, 3” (7.62 cm) suction/fill line. Hydraulic flow control valve, RFM 60 flow meter and 2” (5.8 cm) fast fill kit. 2" (5.08 cm) Product tank drain kit. NOTE: Rate Controllers & Speed Sensors are NOT INCLUDED.
      Bypass Line/Fill Circuit: 2” (5.08 cm)
      product tank Bypass/Fill line between Y- Strainer and product tank, includes one- way check valve. Useful for faster agitation while filling, prevents pressure spikes when optional electric bypass valve is ordered and you have the ability to fill product tank with the sprayer pump.
      Hardware: Stainless steel on boom and
      most frame parts.
      Boom: 1” (2.5 cm) Stainless steel lines.
      Front mount with nitrogen accumulator suspension. U.S. sizes - 90/60’, 100/60’ and 120/70’ ( 27.4/18.3, 30.48/18.3 and 36.5/21.3 m) Metric sizes - 30/18, 32/18 and 36/22 m. 3 way nozzle bodies.
      Wheel Tread: Hydraulically adjustable
      tread width from 120" (304.8 cm) narrow to 160" (406.4 cm) wide. 18" (45.7 cm) leg profile at wheel drive hub. Includes tread width locking valve. Note: Tread width is based on 380/90R46 tires.
      Lighting & Markings:
      Forward Lighting -2 high/low beam headlights, 4 working lights, 6 stadium working lights & 4 amber warning/signals. Rear Lighting -2 working/backup, 2 red tail/brake, 2 tail/signal & 2 amber warning/signal. Backup alarm. SMV sign
IRONBuilder
Select your region:  
**Prices quoted are Manufacturer Suggested Retail Prices. Configurations and pricing must be reviewed by a New Holland dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.