Build and Price your own Case Construction Equipment
  • Summary

Your Summary

Speedrower® Self-Propelled Windrowers
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to manage your saved config group.
Select your region:  
Home > Seeding & Application > Speedrower® Self-Propelled Windrowers

2. Select a model

  • ENGINE
    126 hp (94 kW)* New Holland NEF 274 CID (4.5 L) 4 Cylinder, Turbocharged Diesel Engine, with air-to-air intercooler (meets Tier 3 emissions standards) Mechanically Controlled Fuel Injection System Exhaust Aspirated Air Cleaner Engine Exhaust Muffler Rotary Radiator Screen Cleaner 150 amp Alternator (1) 12-volt 925CCA Low Maintenance Battery 120-gallon (454 L) Fuel Tank
    ** TOPSPIN™ is a registered trademark
    of the Donaldson Company, Inc.
    *Manufacturer's Rating Per ECE R120 / ISO 14396
    ** TOPSPIN™ is a registered trademark of the Donaldson Company, Inc.
    CHASSIS/DRIVELINE
    Two Speed Range Hydrostatic Transmission Heavy-duty, Double Reduction Planetary Final Drives Spring Applied, Hydraulically Released Park Brake (console switch controlled) Adjustable Rear Axle with 14L x 16.1, 8PR tires Fixed Speed Hydraulic Header Drive Less Header Drive Motor Hydraulic couplers for header drive motor attachment HS Hay Head Power Reverser (in-cab control) Hydraulic Header Flotation (in-cab adjustable) Hydraulic Header Tilt (in-cab control plus LH remote control switch) Manual Adjust Hay Windrow Shields (used on non-draper machines only) Single Lever Header Transport Lock System Lockable Outside Storage Compartment CAB Comfort Ride™ Cab with cab suspension Curved, Tinted Glass with left-hand door entry Adjustable Tilt/Telescopic Steering Column Fore/Aft Adjustable Right-hand Control Console, moves with seat Deluxe Fabric-covered, air-suspension Operator's Seat, includes: Fore/aft isolator Lumbar and ride dampener adjustment Retractable seat belt Operator’s Presence Protection System Instructor's Seat with seat belt Beverage Cup Holder, Lighter and Ashtray Air-Conditioner and Heater with manual temperature control Dual Cab Air Filtration System, includes: (1) Fresh air external filter (1) In-cab recirculation filter Cab Interior Lighting Package, includes: (1) Center Dome Light, (1) Right-Hand Console Light Radio-ready with AM/FM Antenna (2) Speakers and DIN Mounting Slot (2) Additional Radio (communications) Port Locations with DIN mounting slots Business Band antenna ready (2) External Mount Rear View Mirrors (mechanical adjust) (1) In-cab Rearview Mirror (1) 12-volt Auxiliary Power Outlet EST (Electronic Service Tool) Diagnostic Port
    CONTROLS AND INSTRUMENTATION
    Low-effort Ground Speed/forward-neutral reverse control Multifunction Handle with push button controls for: Performance Monitor display selection Header raise/lower Header tilt control Reel raise/lower (draper headers) Reel fore/aft (draper headers) Header cut height (draper headers) Header lateral tilt (draper headers) Header Engagement/Reverser Controls Header Flotation Adjustment In-Cab Reel Speed Control Auto Reel Speed to ground speed synchronization or manual control for draper header operation Remote head tilt control switch Park Brake Control Horn Adjustable Position, Console Mounted Performance Monitor, with 4-line Display readout Major machine functions monitored include: engine oil pressure engine coolant temperature engine rpm battery voltage ground speed fuel level engine/header hours hydrostatic transmission charge oil pressure Automatic engine shutdown protection for: low engine oil pressure coolant overheat low hydrostatic charge oil pressure.
    *Center Delivery Draper-Ready Package
    (includes fixed position crop deflector shields and 2.75" head lift cylinders) Single Lever Header Attaching Lock System Lockable Outside Storage Compartment *Fixed window shields Includes single arm support tail wheels
    LIGHTING
    (2) Halogen, Cab Roof-mounted Roading Lights (4) Halogen, Cab Roof-mounted Work Lights (2) Halogen, Rear Work Lights (2) Halogen, Stubble Lights (2) Combination rear Tail Light/Brake Lights (2) Combination Turn signal/Hazard Flashers 12 volt, Service Light Receptacle
    CAB
    Curved, Tinted Glass with left-hand door entry Front Windshield Wiper/Washer Comfort Ride™ Cab with cab suspension Deluxe Cab Upgrade Package, includes: Extra quiet cab enhancement includes integrated acoustic material Automatic Temperature Control for heater and air conditioner (4) Premium Sound Radio Speakers Pull-down Front Window Shade Pull-down Rear Window Shade Cab "A" Pillar Warning Lightbar, with LCD bar graph gauges for engine coolant temperature and fuel level Adjustable Tilt/Telescopic Steering Column Fore/Aft Adjustable Right-hand Control Console, moves with seat Deluxe Fabric-covered, air-suspension Operator's Seat, includes: Fore/aft isolator Lumbar and ride dampener adjustment Retractable seat belt Operator’s Presence Protection System Instructor's Seat with seat belt Beverage Cup Holder, Lighter and Ashtray Dual Cab Air Filtration System, includes: (1) Fresh air external filter (1) In-cab recirculation filter Cab Interior Lighting Package, includes: (1) Center Dome Light, (1) Right-Hand Console Light Radio-ready with AM/FM Antenna and DIN Mounting Slot (2) Additional Radio (communications) Port Locations with DIN mounting slots Business Band Antenna Ready (2) External Mount Rear View Mirrors (mechanical adjust) (1) In-cab Rearview Mirror (1) 12-volt Auxiliary Power Outlet EST (Electronic Service Tool) Diagnostic Port
    WARRANTY
    New Holland Standard Warranty Applies
    Major machine functions monitored
    include: engine oil pressure engine coolant temperature engine rpm battery voltage ground speed fuel level engine/header hours hydrostatic transmission charge oil pressure Automatic engine shutdown protection for: low engine oil pressure coolant overheat low hydrostatic charge oil pressure.
    NOTE: The H8040 can be ordered in 4
    ways: 1. Order the base unit, desired tires/wheels and any factory suppliedoptions needed. 2. Western Special packet with R3 turf tires/wheels. 3. Western Special packet with R4 ind. tread lug tires/wheels. 4. Prairie Special packet.
    See packet lists for options included in
    each packet.
    For draper work, this is the best choice
    to ensure getting all the needed
  • ENGINE
    190 hp (142 kW)* New Holland NEF411 CID (6.7 L) 6 Cylinder, Turbocharged Diesel Engine, with air-to-air intercooler (meets Tier 3 emissions standards) Electronically Controlled, High Pressure Common Rail Fuel Injection System Donaldson TopSpin™ Air Precleaner** Engine Exhaust Muffler Rotary Radiator Screen Cleaner 150 amp Alternator (2) 12-volt 650CCA Low Maintenance Batteries 120-gallon (454 L) Fuel Tank
    *Manufacturer's Rating Per ECE R120 / ISO 14396
    ** TOPSPIN™ is a registered trademark of the Donaldson Company, Inc.
    CHASSIS/DRIVELINE
    Two Speed Range Hydrostatic Transmission Heavy-duty, Double Reduction Planetary Final Drives Spring Applied, Hydraulically Released Park Brake (console switch controlled) Heavy-duty Adjustable Rear Axle with 14L x 16.1, 8 PR Rear Tires Variable Speed Hydrostatic Header Drive Less Header Drive Motor Hydraulic couplers for header drive motor attachment Head Power Reverser (in-cab control), for HS Haybine® heads or Discbine® heads Deluxe Hydraulic Header Flotation (flotation weight at each end of header independently controlled from cab) Hydraulic Header Tilt (in-cab control plus LH remote control switch) w/ tilt indicator on tilt cylinder 8" Stroke Head Tilt Cylinder Manual Adjust Hay Windrow Shields (used on non-draper machines only) Single Lever Header Transport Lock System Header Lift Arm Quick Latch System Lockable Outside Storage Compartment
    CAB
    Comfort Ride™ Cab including Cab Suspension Curved, Tinted Glass with left-hand door entry Adjustable Tilt/Telescopic Steering Column Fore/Aft Adjustable Right-hand Control Console, moves with seat Deluxe Fabric-covered, air-suspension Operator's Seat, includes: fore/aft isolator lumbar and ride dampener adjustment retractable seat belt Operator’s Presence Protection System Instructor's Seat with seat belt Cup Holder, Lighter and Ashtray Air-Conditioner and Heater with manual temperature control Dual Cab Air Filtration System: (1) Fresh air external filter (1) In-cab recirculation filter Cab Interior lighting package, includes: (1) Center Dome Light (1) Right-Hand Console Light Radio-ready with AM/FM Antenna (2) Speakers and DIN Mounting Slot (2) Additional Radio (communications) Port Locations with DIN mounting slots Business Band Antenna Ready Windshield Wiper/Washer (2) External Mount Rear View Mirrors (mechanical adjust) (1) In-cab Rearview Mirror (2) 12-volt Auxiliary Power Outlets EST (Electronic Service Tool) Diagnostic Port
    CONTROLS AND INSTRUMENTATION
    Low-effort Ground Speed/forward- neutral reverse control Multifunction Handle with push button controls for: Performance Monitor display selection Header raise/lower Header tilt control Reel raise/lower (draper headers) Reel fore/aft (draper headers) Header cut height (draper headers) Header lateral tilt (draper headers) Header Engagement/Reverser Controls Header Flotation Adjustment Discbine® Header Speed Adjustment Remote head tilt control switch Park Brake Control Horn Adjustable Position, Console Mounted Performance Monitor, with 4-line Display readout Major machine functions monitored include: engine oil pressure engine coolant temperature engine rpm battery voltage ground speed fuel level engine/header hours hydrostatic transmission charge oil pressure Automatic engine shutdown protection for: low engine oil pressure coolant overheat low hydrostatic charge oil pressure. Advanced Power Managemnet System
    LIGHTING
    (2) Halogen, Cab Roof-mounted Roading Lights (4) Halogen, Cab Roof-mounted Work Lights (2) Halogen, Rear Work Lights (2) Halogen, Stubble Lights (2) Combination rear Tail Light/Brake Lights (2) Combination Turn signal/Hazard Flashers Time Delay Cab Exit Light 12 volt, Service Light Receptacle
    WARRANTY
    New Holland Standard Warranty Applies
    NOTE: The H8060 can be ordered in 2
    ways: 1. Order the base unit, desired tires/wheels and any factory supplied options and field installed completing packages needed. 2. Prairie Special packet.
    See packet list for options included in
    the packet.
  • ENGINE
    226 hp (169 kW)* New Holland NEF411 CID (6.7 L) 6 Cylinder, Turbocharged Diesel Engine,with air-to-air intercooler (meets Tier 3 emissions standards) Electronically Controlled, High Pressure, Common Rail Fuel Injection System Donaldson TopSpin™ Air Precleaner** Engine Exhaust Muffler Rotary Radiator Screen Cleaner 150 amp Alternator (2) 12-volt 650CCA Low Maintenance Batteries 120-gallon (454 L) Fuel Tank
    *Manufacturer's Rating Per ECE R120 / ISO 14396
    ** TOPSPIN™ is a registered trademark of the Donaldson Company, Inc.
    CHASSIS/DRIVELINE
    Two Speed Range Hydrostatic Transmission Heavy-duty, Double Reduction Planetary Final Drives Spring Applied, Hydraulically Released Park Brake (console switch controlled) Heavy-duty Adjustable Rear Axle with 14L x 16.1, 8 PR Rear Tires Variable Speed Hydrostatic Header Drive Less Header Drive Motor Hydraulic couplers for header drive motor attachment Head Power Reverser (in-cab control), for HS Haybine® heads or Discbine® heads Deluxe Hydraulic Header Flotation (flotation weight at each end of header independently controlled from cab) Hydraulic Header Tilt (in-cab control plus LH remote control switch) with tilt indicator on the tilt cylinder 8" stroke header tilt cylinder Manual Adjust Hay Windrow Shields (used on non-draper machines only) Single Lever Header Transport Lock System Header Lift Arm Quick Latch System Large Diameter (2.75") Head Lift Cylinders
    Lockable Outside Storage Compartment CAB
    Comfort Ride™ Cab including cab Suspension Curved, Tinted Glass with left-hand door entry Adjustable Tilt/Telescopic Steering Column Fore/Aft Adjustable Right-hand Control Console, moves with seat Deluxe Fabric-covered, air-suspension Operator's Seat, includes: fore/aft isolator lumbar and ride dampener adjustment retractable seat belt Operator’s Presence Protection System Instructor's Seat with seat belt Beverage Cup Holder, Lighter and Ashtray Air-Conditioner and Heater with manual temperature control Dual Cab Air Filtration System: (1) Fresh air external filter (1) In-cab recirculation filter Cab Interior lighting package, includes: (1) Center Dome Light (1) Right-Hand Console Light Radio-ready with AM/FM Antenna (2) Speakers and DIN Mounting Slot (2) Additional Radio (communications) Port Locations with DIN mounting slots Business Band antenna ready Windshield Wiper/Washer (2) External Mount Rear View Mirrors (mechanical adjust) (1) In-cab Rearview Mirror (2) 12-volt Auxiliary Power Outlets EST (Electronic Service Tool) Diagnostic Port
    CONTROLS AND INSTRUMENTATION
    Low-effort Ground Speed/forward- neutral reverse control Multifunction Handle with push button controls for: Performance Monitor display selection Header raise/lower Header tilt control Reel raise/lower (draper headers) Reel fore/aft (draper headers) Header cut height (draper headers) Header lateral tilt (draper headers) Header Engagement/Reverser Controls Header Flotation Adjustment Discbine® Header Speed Adjustment Remote head tilt control switch Park Brake Control Horn Adjustable Position, Console Mounted Performance Monitor, with 4-line Display readout Major machine functions monitored include: engine oil pressure engine coolant temperature engine rpm battery voltage ground speed fuel level engine/header hours hydrostatic transmission charge oil pressure Automatic engine shutdown protection for: low engine oil pressure coolant overheat low hydrostatic charge oil pressure. Advanced Power Management System
    LIGHTING
    (2) Halogen, Cab Roof-mounted Roading Lights (4) Halogen, Cab Roof-mounted Work Lights (2) Halogen, Rear Work Lights (2) Halogen, Stubble Lights (2) Combination rear Tail Light/Brake Lights (2) Combination Turn signal/Hazard Flashers Time Delay Cab Exit Light 12 volt, Service Light Receptacle
  • Model 720HD
    13 ft. (3.9m) Cutting Width10 Disc MowMax™ Modular Cutterbar with crop lifters Hydrostatically Driven Header with dual hydraulic header drive motors, hoses and quick couplers 102 in. wide, 10-3/8 in. diameter Conditioning Rolls High Speed Conditioning Rolls (920 rpm) Windrow and Wide Swath Width Adjustable from 38 in. to 96 in. High Density Polyethylene Impact Hood Liner ShockPRO™ Cutterbar Protection System
    WARRANTY
    New Holland Standard Warranty Applies
    WINDROWER REQUIREMENTS
    Recommended for use with HW340,HW345, HW365, H8060 or H8080 Self- Propelled Windrowers. To avoid running over uncut crop during field operation, windrower tractor cannot be equipped with 23.1 x 26 drive tires.
    If installing on Model HW340 Windrower
    tractor, refer to ASIST for specificmounting and tractor adapting requirements.
    Not compatible with HW345, HW365,
    H8060 or H8060 Windrowers equippedwith a factory installed draper head adapter package, or large-bore head lift cylinders installed in conjunction with a dealer installed Draper Head Adapter Package used with 30 ft. or 36 ft. draper
  • *** CURRENT INVENTORY ONLY ***
    750HD with Conditioner
    15 ft. 5 in. (4.7m) Cutting Width
    12 Disc MowMax™ Modular Cutterbar with crop lifters 20 in. Diameter Floating Auger Hydrostatically Driven Head with dual hydraulic header drive motors, hoses and quick couplers Removable Conditioner Roll Module 102 in. wide, 10-3/8 in. diameter Conditioning Rolls High Speed Conditioning Rolls (923 rpm) Windrow and Wide Swath Width Adjustable from 38 in. to 96 in. High Density Polyethylene Impact Hood Liner ShockPRO™ Cutterbar Protection System
    750HD Less Conditioner
    15 ft. 5in. (4.7m) Cutting Width12 Disc MowMax™ Modular Cutterbar with crop lifters 20 in. Diameter Floating Auger Hydrostatically Driven Head with dual hydraulic header drive motors, hoses and quick couplers High Density Polyethylene Impact Resistant Hood Liner ShockPRO™ Cutterbar Protection System *** CURRENT INVENTORY ONLY ***
    750HD Specialty Disc Head
    15 ft. 5in. (4.7m) Cutting Width12 Disc MowMax™ Modular Cutterbar, less crop lifters, except on drive module discs Hydrostatically Driven Header with dual hydraulic header drive motors, hoses and quick couplers High Density Polyethylene Impact Hood Liner 20 in. Diameter Floating Auger, with: 7-in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Paddles and Paddle Mounts 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods Less Conditioner Roll Module ShockPRO™ Cutterbar Protection System High pushbar Secondary curtain above cutterbar
    WARRANTY
    New Holland Standard Warranty Applies
    WINDROWER REQUIREMENTS
    Recommended for use with HW340,HW345, H8060 or H8080 Self-Propelled Windrowers equipped with 18.4 x 26, 18.4R26, 23.1 x 26 or 21L x 28 drive tires.
  • *** CURRENT INVENTORY ONLY ***
    770HD Less Conditioner
    18 ft. (5.5m) Cutting Width
    14 Disc MowMax™ Modular Cutterbar with crop lifters Full Length 20 in. Diameter Floating Auger with 7-inch deep reinforced flighting Hydrostatically Driven Head with dual hydraulic header drive motors, hoses and quick couplers High Density Polyethylene Impact Resistant ShockPRO™ Cutterbar Protection System
    WARRANTY
    New Holland Standard Warranty Applies
  • These heads are for use on all H8000
    Series, HW "5 Series", HW "0 Series"and 2450/2550 Self-Propelled Windrowers; 2300 BF and 2330 BR Adapter Frame, 1475 and H7150 Pivot Tongue Mower-Conditioner.
    STANDARD EQUIPMENT
    Hydraulically DrivenLess Head Drive Motor Dual Mechanically Driven Counterstroking Sickles with Heavy- Duty Wobbles 100% Bolted, Thick (.120) Overserrated Knife Sections Bolt-Adjustable Knife Hold-Down Clips Cutterbar Wearplate Storage Area for (2) Complete Knife Assemblies Mechanically Driven, Adjustable Speed 5-Bat Reel Fore/Aft and Vertically Adjustable Reel 20 in. diameter Floating Auger with 5 in. deep Flighting Auger Slip Clutch Low Profile Floor Pan (4) Adjustable Skid Shoes Gearbox Driven 102 in. wide, 10-3/8 in. diameter Conditioner Rolls Windrow and Wide Swath Width Adjustable from 38 in. to 96 in. Segmented Tine Bars with Bearings and Bushings
    WARRANTY
    New Holland Standard Warranty Applies
    Must order 716965 sickle head adapter
    to operate with an H8000 windrower.**HS0012 is not compatible with model 1475 and H7150 Trail Frame. HS0012 is only recommended for use on windrower tractors with 16.9-28 R4
  • These heads are for use on all H8000
    Series, HW "5 Series", HW "0 Series"and 2450/2550 Self-Propelled Windrowers; 2300 BF and 2330 BR Adapter Frame, 1475 and H7150 Pivot Tongue Mower-Conditioner.
    STANDARD EQUIPMENT
    Hydraulically DrivenLess Head Drive Motor Dual Mechanically Driven Counterstroking Sickles with Heavy- Duty Wobbles 100% Bolted, Thick (.120) Overserrated Knife Sections Bolt-Adjustable Knife Hold-Down Clips Cutterbar Wearplate Storage Area for (2) Complete Knife Assemblies Mechanically Driven, Adjustable Speed 5-Bat Reel Fore/Aft and Vertically Adjustable Reel 20 in. diameter Floating Auger with 5 in. deep Flighting Auger Slip Clutch Low Profile Floor Pan (4) Adjustable Skid Shoes Gearbox Driven 102 in. wide, 10-3/8 in. diameter Conditioner Rolls Windrow and Wide Swath Width Adjustable from 38 in. to 96 in. Segmented Tine Bars with Bearings and Bushings
    WARRANTY
    New Holland Standard Warranty Applies
    Must order 716965 sickle head adapter
    to operate with an H8000 windrower.**HS0012 is not compatible with model 1475 and H7150 Trail Frame. HS0012 is only recommended for use on windrower tractors with 16.9-28 R4
  • These heads are for use on all H8000
    Series, HW "5 Series", HW "0 Series"and 2450/2550 Self-Propelled Windrowers; 2300 BF and 2330 BR Adapter Frame, 1475 and H7150 Pivot Tongue Mower-Conditioner.
    STANDARD EQUIPMENT
    Hydraulically DrivenLess Head Drive Motor Dual Mechanically Driven Counterstroking Sickles with Heavy- Duty Wobbles 100% Bolted, Thick (.120) Overserrated Knife Sections Bolt-Adjustable Knife Hold-Down Clips Cutterbar Wearplate Storage Area for (2) Complete Knife Assemblies Mechanically Driven, Adjustable Speed 5-Bat Reel Fore/Aft and Vertically Adjustable Reel 20 in. diameter Floating Auger with 5 in. deep Flighting Auger Slip Clutch Low Profile Floor Pan (4) Adjustable Skid Shoes Gearbox Driven 102 in. wide, 10-3/8 in. diameter Conditioner Rolls Windrow and Wide Swath Width Adjustable from 38 in. to 96 in. Segmented Tine Bars with Bearings and Bushings
    WARRANTY
    New Holland Standard Warranty Applies
    Must order 716965 sickle head adapter
    to operate with an H8000 windrower.**HS0012 is not compatible with model 1475 and H7150 Trail Frame. HS0012 is only recommended for use on windrower tractors with 16.9-28 R4
  • These heads are for use on all H8000
    Series, HW "5 Series", HW "0 Series"and 2450/2550 Self-Propelled Windrowers; 2300 BF and 2330 BR Adapter Frame, 1475 and H7150 Pivot Tongue Mower-Conditioner.
    STANDARD EQUIPMENT
    Hydraulically DrivenLess Head Drive Motor Dual Mechanically Driven Counterstroking Sickles with Heavy- Duty Wobbles 100% Bolted, Thick (.120) Overserrated Knife Sections Bolt-Adjustable Knife Hold-Down Clips Cutterbar Wearplate Storage Area for (2) Complete Knife Assemblies Mechanically Driven, Adjustable Speed 5-Bat Reel Fore/Aft and Vertically Adjustable Reel 20 in. diameter Floating Auger with 5 in. deep Flighting Auger Slip Clutch Low Profile Floor Pan (4) Adjustable Skid Shoes Gearbox Driven 102 in. wide, 10-3/8 in. diameter Conditioner Rolls Windrow and Wide Swath Width Adjustable from 38 in. to 96 in. Segmented Tine Bars with Bearings and Bushings
    WARRANTY
    New Holland Standard Warranty Applies
    Must order 716965 sickle head adapter
    to operate with an H8000 windrower.**HS0012 is not compatible with model 1475 and H7150 Trail Frame. HS0012 is only recommended for use on windrower tractors with 16.9-28 R4
  • DURABINE 416 [ Versions ]
    • Durabine™ 416 CUTTERBAR:
      16’ 1” cutting width Hydrostatically driven head with two drive motors 10 disc MowMax™ II true modular cutterbar Two 18 degree cutting knives per 24.3” (618mm) disc ShockPro™ cutterbar drive train protection system Polyethylene impact resistant hood liners
      Durabine™ 419 CUTTERBAR:
      19’ 4” cutting width Hydrostatically driven head with two drive motors 12 disc MowMax™ II true modular cutterbar Two 18 degree cutting knives per 24.3” (618mm) disc ShockPro™ cutterbar drive train protection system Polyethylene impact resistant hood liners
      CROP FLOW AUGER:
      Full cutterbar length, 209.1” (5311mm) 20” (508mm) diameter floating feed auger 7” (178mm) deep flighting Removable feed paddles
      CONDITIONING SYSTEM:
      Removable 102” wide conditioning system module Chevron rubber intermeshing conditioning rolls – 10 3/8” diameter 938 rpm roll input speed @ full cutterbar speed Torsion-bar roll pressure system with single crank handle adjustment Rolls separate automatically on-the-go to allow thick material to pass Roll gap adjustment with one screw on each end of the conditioner Conditioning system drive: 4HB v-belt, enclosed gears w/u-joints Swath/windrow width from 38” to 96”
      CONVENIENCE AND SAFETY:
      Two adjustable parking stands Standard Flashing and Turn Signal Lights Hinged shield w/over-center gas spring Enclosed, plastic, telescoping PTO shields Overlapping curtains at each joint- meets ISO 17103 standards
      WINDROWER REQUIREMENTS:
      Recommended for use with HW365 and H8080 Windrower must be equipped with 18.4X26, 18.4R26, 23.1X26 or 21.LX28, 16.9X28 tires/wheels.
      WARRANTY:
      New Holland standard warranty applies
    • Durabine™ 416 CUTTERBAR:
      16’ 1” cutting width Hydrostatically driven head with two drive motors 10 disc MowMax™ II true modular cutterbar Two 18 degree cutting knives per 24.3” (618mm) disc ShockPro™ cutterbar drive train protection system Polyethylene impact resistant hood liners
      Durabine™ 419 CUTTERBAR:
      19’ 4” cutting width Hydrostatically driven head with two drive motors 12 disc MowMax™ II true modular cutterbar Two 18 degree cutting knives per 24.3” (618mm) disc ShockPro™ cutterbar drive train protection system Polyethylene impact resistant hood liners
      CROP FLOW AUGER:
      Full cutterbar length, 209.1” (5311mm) 20” (508mm) diameter floating feed auger 7” (178mm) deep flighting Removable feed paddles
      CONDITIONING SYSTEM:
      Removable 102” wide conditioning system module Chevron rubber intermeshing conditioning rolls – 10 3/8” diameter 938 rpm roll input speed @ full cutterbar speed Torsion-bar roll pressure system with single crank handle adjustment Rolls separate automatically on-the-go to allow thick material to pass Roll gap adjustment with one screw on each end of the conditioner Conditioning system drive: 4HB v-belt, enclosed gears w/u-joints Swath/windrow width from 38” to 96”
      CONVENIENCE AND SAFETY:
      Two adjustable parking stands Standard Flashing and Turn Signal Lights Hinged shield w/over-center gas spring Enclosed, plastic, telescoping PTO shields Overlapping curtains at each joint- meets ISO 17103 standards
      WINDROWER REQUIREMENTS:
      Recommended for use with HW365 and H8080 Windrower must be equipped with 18.4X26, 18.4R26, 23.1X26, 21.LX28, 16.9X28, 580/70R26 or 600/65R28 tires/wheels.
      WARRANTY:
      New Holland standard warranty applies
  • Durabine™ 416 CUTTERBAR:
    16’ 1” cutting width Hydrostatically driven head with two drive motors 10 disc MowMax™ II true modular cutterbar Two 18 degree cutting knives per 24.3” (618mm) disc ShockPro™ cutterbar drive train protection system Polyethylene impact resistant hood liners
    Durabine™ 419 CUTTERBAR:
    19’ 4” cutting width Hydrostatically driven head with two drive motors 12 disc MowMax™ II true modular cutterbar Two 18 degree cutting knives per 24.3” (618mm) disc ShockPro™ cutterbar drive train protection system Polyethylene impact resistant hood liners
    CROP FLOW AUGER:
    Full cutterbar length, 209.1” (5311mm) 20” (508mm) diameter floating feed auger 7” (178mm) deep flighting Removable feed paddles
    CONDITIONING SYSTEM:
    Removable 102” wide conditioning system module Chevron rubber intermeshing conditioning rolls – 10 3/8” diameter 938 rpm roll input speed @ full cutterbar speed Torsion-bar roll pressure system with single crank handle adjustment Rolls separate automatically on-the-go to allow thick material to pass Roll gap adjustment with one screw on each end of the conditioner Conditioning system drive: 4HB v-belt, enclosed gears w/u-joints Swath/windrow width from 38” to 96”
    CONVENIENCE AND SAFETY:
    Two adjustable parking stands Standard Flashing and Turn Signal Lights Hinged shield w/over-center gas spring Enclosed, plastic, telescoping PTO shields Overlapping curtains at each joint- meets ISO 17103 standards
    WINDROWER REQUIREMENTS:
    Recommended for use with HW365 and H8080 Windrower must be equipped with 18.4X26, 18.4R26, 23.1X26, 21.LX28, 16.9X28, 580/70R26 or 600/65R28 tires/wheels.
    WARRANTY:
    New Holland standard warranty applies
  • 21 ft. (6.4m) cutting width
    Double knife onlyDouble-swath center delivery - 50 in. (1.27m) Double-swath side delivery - 45 in. (1.14m)
    CUTTING SYSTEMS
    Double Sickle (choose one): Schumacher EasyCut system with spring steel guards; bolt-on plated knife sections, Rollerguide knifeback guide system. New Holland steel forged guards, adjustable hold-down clips and bolted knife sections (recommended for green feed cutting conditions)
    OTHER EQUIPMENT
    Slow Speed Transport with Tires/Wheels/ and Tongue Hay Guard
    DRAPER BELTS
    42 in. rubberized polyester, with fiberglass reinforced, tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute Rubber vulcanized drive rolls with V-guide
    REEL
    UII reels with end-tine packageDirect Hydraulic Drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic Reel Lift In-cab controlled auto reel-speed for groundspeed synchronization
    WARRANTY
    New Holland Standard Warranty Applies
  • 25 ft. (7.6m) cutting width
    Single or double knifeCenter-delivery opening- 80 in. (2.03m) Double-swath center opening - 56 in. (1.42m) Double-swath side opening - 50 in. (1.27m)
    SICKLE KNIFE DRIVE
    Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (84mm)
    CUTTING SYSTEMS
    Single Sickle: Schumacher EasyCut system with spring steel guards; bolt- on plated knife sections; and Rollerguide knifeback guide system Double Sickle (choose one): Schumacher EasyCut system with spring steel guards; bolt-on plated knife sections, Rollerguide knifeback guide system. New Holland steel forged guards, adjustable hold-down clips and bolted knife sections (recommended for green feed cutting conditions)
    DRAPER BELTS
    42 in. rubberized polyester, with fiberglass reinforced, tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute Rubber vulcanized drive rolls with V-guide
    REEL
    UII reels with end-tine packageDirect Hydraulic Drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic Reel Lift In-cab controlled auto reel-speed for groundspeed synchronization
    OTHER EQUIPMENT
    Slow Speed Transport with Tires/Wheels/ and Tongue Hay Guard
    WARRANTY
    New Holland Standard Warranty Applies
  • 30 ft. (9.1m) cutting width
    Single or double knifeCenter-delivery opening- 80 in. (2.03m) Double-swath center opening - 56 in. (1.42m) Double-swath side opening - 50 in. (1.27m) Castering Gauge Wheels
    SICKLE KNIFE DRIVE
    Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (84mm)
    CUTTING SYSTEMS
    Single Sickle: Schumacher EasyCut system with spring steel guards; bolt- on plated knife sections; and Rollerguide knifeback guide system Cast knife end
    Double Sickle (choose one):
    Schumacher EasyCut system with spring steel guards; bolt-on plated knife sections, Rollerguide knifeback guide system. New Holland steel forged guards, adjustable hold-down clips and bolted knife sections (recommended for green feed cutting conditions)
    DRAPER BELTS
    42 in. rubberized polyester, with fiberglass reinforced, tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute Rubber vulcanized drive rolls with V-guide
    REEL
    UII reels with end-tine packageDirect Hydraulic Drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic Reel Lift In-cab controlled auto reel-speed for groundspeed synchronization
    OTHER EQUIPMENT
    Slow Speed Transport with Tires/Wheels/ and Tongue Hay Guard
    WARRANTY
    New Holland Standard Warranty Applies
  • 36 ft. (11m) cutting width
    Double knife onlyCenter-delivery opening- 80 in. (2.03m) Double-swath center opening - 56 in. (1.42m) Double-swath side opening - 48 in. (1.22m) Castering Gauge Wheels
    CUTTING SYSTEMS
    Double Sickle (choose one): Schumacher EasyCut system with spring steel guards; bolt-on plated knife sections, Rollerguide knifeback guide system. New Holland steel forged guards, adjustable hold-down clips and bolted knife sections (recommended for green feed cutting conditions)
    OTHER EQUIPMENT
    Slow Speed Transport with Tires/Wheels/ and Tongue Hay Guard
    DRAPER BELTS
    42 in. rubberized polyester, with fiberglass reinforced, tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minut Rubber vulcanized drive rolls with V-guide
    REEL
    UII reels with end-tine packageDirect Hydraulic Drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic Reel Lift In-cab controlled auto reel-speed for groundspeed synchronization
    WARRANTY
    New Holland Standard Warranty Applies
IRONBuilder
Select your region:  
**Prices quoted are Manufacturer Suggested Retail Prices. Configurations and pricing must be reviewed by a New Holland dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.